DG250 GC (3 phase)
DG250-2 (3 phase)
DG250 GC (3 phase)
DESCRIPTION
The Cat® spark-ignited generator product line for stationary applications feature permanent magnet excitation, amortisseur winding, skewed stator, voltage adjustment through the EMCP controller, Class H winding insulation and 2/3 pitch incorporated.Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.Electric PowerEngine
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
Cat EMCP Control Panel
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.
Design Criteria
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
UL 2200 / CSA - Optional
- UL 2200 listed packages
- CSA Certified
- Certain restrictions may apply.
- Consult with your Cat® Dealer.
Worldwide Product Support
Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Cooling
- Factory-installed radiator
- Closed coolant recovery system
- 50/50 Ethylene glycol antifreeze
- Standard ambient temperatures up to 50°C (122°F)
- Radiator and cooling fan complete with protective guards
- Air Inlet
- Single element air filter
- Fuel
- Low fuel pressure switch
- Fuel pressure test po
- Primary and secondary fuel shut-off
- Dual lock off valves
- NPT connection
- Natural Gas or LP Vapor
- Generator
- Class H insulation material
- Full load capacity alternator
- Permanent magnet excitation
- Full load capacity alternator
- Permanent magnet excitation
- Matched to the performance and output characteristics of Cat engines
- Integrated Voltage Regulator
- Class H insulation material
- IP23 Protection
- Exhaust
- Exhaust outlet with 3” pipe
- Controls
- EMCP 4.2 Series generator set controller
- Mounting
- Vibration isolaton (puck type)
- Rubber vibration isolators
- Electric Starting and/or Prelube
- Solenoid activated starter motor
- Engine electrical system
- Battery cables
- Solenoid activated starter motor
- Electric Power - Package Serial Number Prefix
- Battery charging alternator
- Governor
- Electronic governor (non adjustable)
- Control Panel
- EMCP 4.2 Series generator set controller
- Starting/Charging
- 12 volt starting motor
- Batteries with rack and cables
Optional Equipment
- Starting/Charging
- Battery heater
- Battery charger – UL Listed 10 amp
- Jacket water heater
- Charging alternator
- General
- CSA Certification
- Suitable for Use as Service Equipment (SUSE)
- UL 2200 package
- Enclosures: sound attenuated, weather protective
- Automatic transfer switches (ATS)
- Generator
- Shunt trip and auxiliary contact breaker
- Anti-condensation heater
- Thermal magnetic or electronic trip MCCBs
- Oversize and premium generators
- Excitation: [ ] Permanent Magnet Excited (PM)
- Anti-condensation heater
Specs
Overview
Long Name:
DG250-2 (3 phase)
Name:
DG250 GC (3 phase)
Brand:
Caterpillar
Status:
Current
Generator Set Specifications
Frequency
60 Hz
Natural Gas Rating
250 eKW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
Displacement
864.7 in³ / 14.2 l
Engine Specifications
Fuel System
Carbureter, Down Draft
Generator Set Specifications
Speed
1800 rpm
Engine Specifications
Aspiration
Turbocharged - Aftercooled
Compression Ratio
9.5:1
Bore
5.31 in / 135 mm
Stroke
6.5 in / 165 mm
Generator Set Dimensions
Length
138.74 in / 3524.1 mm
Width
57.6 in / 1463.1 mm
Height
68.04 in / 1728.3 mm
Weight
6364 lb / 2887 kg
SEE HOW DG250 GC (3 phase) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Gas Generator Sets
DG250 GC (3 phase)
- Brand
- Caterpillar
- Status
- Current
- Frequency
- 60 Hz
- Natural Gas Rating
- 250 eKW
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Speed
- 1800 rpm
- Bore
- 5.31 in / 135 mm
- Stroke
- 6.5 in / 165 mm
- Length
- 138.74 in / 3524.1 mm
- Width
- 57.6 in / 1463.1 mm
- Height
- 68.04 in / 1728.3 mm
- Weight
- 6364 lb / 2887 kg
Selected Model
Gas Generator Sets
DG230 GC (3 phase)
- Brand
- Caterpillar
- Status
- Current
- Frequency
- 60 Hz
- Natural Gas Rating
- 230 eKW
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Speed
- 1800 rpm
- Bore
- 1463.1 mm / 138.74 in
- Stroke
- 1728.3 mm / 57.6 in
- Length
- 2887 kg / 68.04 in
- Width
- 57.6 in / 6364 lb
- Height
- 68.04 in / 1728.3 mm
- Weight
- 6364 lb / 2887 kg
Gas Generator Sets
DG275 GC (3 phase)
- Brand
- Caterpillar
- Status
- Current
- Frequency
- 60 Hz
- Natural Gas Rating
- 275 eKW
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Speed
- 1800 rpm
- Bore
- 5.31 in / 135 mm
- Stroke
- 6.5 in / 165 mm
- Length
- 136 in / 3455 mm
- Width
- 57.6 in / 1463 mm
- Height
- 66.1 in / 1678 mm
- Weight
- 6274 lb / 2852 kg