C15 ACERT™ (Tier 4 FINAL)
C15 ACERT™ Tier 4 Final Engine
DESCRIPTION
Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements. This is an ideal engine for applications that require compliance with the highest emission standards in well service applications such as workover rigs, pump skids, nitrogen units, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C13 ACERT engines with ratings: 354-433 bkW (475-580 bhp) @ 1800-2100 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
High Performance
Simple and efficient turbocharger with balance valve provides optimal air management and improved fuel efficiency.
Fuel Efficiency
Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.
Fuel & Oil
Tier 4 Final, Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 15 ppm sulfur, and new oil formulations to support the new technology. Cat® engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil.
Broad Application Range
Industry-leading range of factory configurable ratings and options for agricultural, materials-handling, construction, mining, forestry, waste, and other industrial applications.
Package Size
Exceptional power density enables standardization across numerous applications. Multiple installation options minimize total package size. Ideal for equipment with narrow engine compartments.
Package Size
Exceptional power density enables standardization across numerous applications. Multiple installation options minimize total package size. Ideal for equipment with narrow engine compartments.
Low-Cost Maintenance
Worldwide service delivers ease of maintenance and simplifies the servicing routine. Minimum 5000-hour diesel particulate filter (DPF) ash service interval enables low-cost maintenance. Capable of optimal oil change intervals of up to 500 hours, depending on rating, application, operating conditions, and maintenance practices. Engine is designed for a B10 life of up to 10,000 hours. The S•O•S SM program is available from your Cat dealer to determine oil change intervals and provide optimal performance.
Quality
Every Cat engine is manufactured to stringent standards in order to assure customer satisfaction
World-class Product Support Offered Through
• Scheduled maintenance, including S•O•S SM sample • Customer Support Agreements (CSA) • Caterpillar Extended Service Coverage (ESC) • Superior dealer service network • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
- Standard Equipment
- Specs
- Docs
Standard Equipment
- Control System
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
- Cooling System
- Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available through your dealer to ensure equipment reliability. Available cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
- Exhaust System
- Mid-mount turbocharged system with front and rear exhaust configurations
- Flywheels and Flywheel Housing
- SAE No. 0 and SAE No. 1 flywheel housings; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
- Fuel System
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
- Lube System
- Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
- General
- Paint: Cat yellow
Specs
Overview
General Specifications
Emissions
Dimensions
SEE HOW C15 ACERT™ (Tier 4 FINAL) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Displacement
- 927.6 in³ / 15.2 l
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 0 or 1
- Flywheel Teeth
- 136 (SAE 0), 113 (SAE 1)
- Stroke
- 6.73 in / 171 mm
- Bore
- 5.39 in / 137 mm
- Emissions
- EPA Tier 4 Final and EU Stage IV
- Length
- 56.6 in / 1438 mm
- Width
- 38.1 in / 969 mm
- Height
- 49.1 in / 1248 mm
- Weight
- 3395.5 lb / 1542 kg
- Brand
- Caterpillar
- Status
- Current
- Displacement
- 928 in³ / 15.2 l
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136 (SAE 0), 113 (SAE 1)
- Stroke
- 6.75 in / 171 mm
- Bore
- 5.4 in / 137.2 mm
- Emissions
- EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
- Length
- 54 in / 1377 mm
- Width
- 37 in / 927 mm
- Height
- 48 in / 1227 mm
- Weight
- 2743 lb / 1245 kg
- Brand
- Caterpillar
- Status
- Current
- Displacement
- 927.6 in³ / 15.2 l
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 113 (SAE 1)
- Stroke
- 6.75 in / 171.5 mm
- Bore
- 5.4 in / 137.2 mm
- Emissions
- IMO Tier II Certified, Marine Tier 2 Certified, Marine Tier 3 Capable
- Length
- 54 in / 1377 mm
- Width
- 37 in / 927 mm
- Height
- 48 in / 1227 mm
- Weight
- 2743 lb / 1245 kg