C32 ACERT™ (Tier 4 Final)
C32 ACERT™ Tier 4 Final Engine
DESCRIPTION
Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs while meeting the tightest environmental requirements.This is an ideal engine for applications that require Tier 4 Final emissions certifications in well service application such as well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C32 ACERT engines, rated 746- 895 bkW (1000-1200 bhp) @ 1800 rpm, designed to meet U.S. EPA Tier 4 Final emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs while meeting the tightest environmental requirements.This is an ideal engine for applications that require Tier 4 Final emissions certifications in well service application such as well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.C32 ACERT engines, rated 746- 895 bkW (1000-1200 bhp) @ 1800 rpm, designed to meet U.S. EPA Tier 4 Final emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.Oil and GasEmissions
- Designed to meet U.S. EPA Tier 4 Final emissions requirements. - On-engine NOx reduction system with optimized piston, ring, liner, and fuel system configuration to reduce NOx while minimizing in-cylinder sooting- Aftertreatment features diesel oxidation catalyst- Meets Tier 4 Final emissions requirements four years early, achieving environmental benefits earlier than required.
Engine Design
- Proven reliability and durability of engine and aftertreatment- Broad operating speed range- High power density- PTO drive options provide flexible access to auxiliary power for pumps and other needs
Low Total Cost of Ownership
- Optimized fuel consumption- Maintenance-free aftertreatment
Advanced Digital Engine Management
ADEM A4 control system providing integrated ignition, speed governing, protection, and controls. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.
Custom Packaging
For any petroleum application, trust Caterpillar to meet your exact needs with a factory custom package. Cat® engines, generators, enclosures, controls, radiators, transmissions, aftertreatment solutions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.
Transmissions
- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface.- C32 ACERT™ optimized Cat transmission match: TH48-E70
Testing
Every engine is full-load tested to ensure proper engine performance.
Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets- Caterpillar factory-trained dealer technicians service every aspect of your petroleum engine- Caterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
- Standard Equipment
- Specs
- Docs
Standard Equipment
- Air Inlet System
- Twin side-mounted turbochargers, ATAAC
- Control System
- Automatic altitude compensation; power compensation for fuel temperature; electronic diagnostics and fault logging; engine monitoring and protection system (speeds, temperature, pressure); J1939 Broadcast (diagnostic, engine status and control); ADEM A4 electronic control
- Cooling System
- Thermostats and housing; jacket water pump, geardriven, centrifugal, RH
- Exhaust System
- Exhaust dry manifold, 127 mm (5 in) slip fit connection, diesel oxidation catalyst
- Fuel System
- Mechanical Electronic Unit Injection (MEUI) system; primary, secondary, and tertiary fuel filter; electronic fuel priming pump-integrated with primary fuel filter base; fuel transfer pump
- Lube System
- Crankcase fumes filtration system, RH mounted; oil cooler — RH; oil filler — RH; oil level gauge — RH; shallow rear sump oil pan — 250-hour
Specs
Overview
General Specifications
Emissions
Dimensions
Capacity for Liquids
SEE HOW C32 ACERT™ (Tier 4 Final) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 1125 BHP / 839 bkW
- Displacement
- 1958 in³ / 32.1 l
- Minimum Rating
- 1125 BHP / 839 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Stroke
- 6.4 in / 162 mm
- Bore
- 5.8 in / 145 mm
- Emissions
- U.S. EPA Tier 4 Final
- Length
- 75 in / 1905 mm
- Width
- 63 in / 1600 mm
- Height
- 61 in / 1549 mm
- Weight
- 6850 lb / 3107 kg
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 1110 BHP / 828 bkW
- Displacement
- 1960 in³ / 32.1 l
- Minimum Rating
- 800 BHP / 597 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136
- Stroke
- 6.4 in / 162 mm
- Bore
- 5.7 in / 145 mm
- Emissions
- U.S. Non-Road Tier 2 CARB, IMO Tier II, EPA Marine Tier 2
- Length
- 76.18 in / 1934.9 mm
- Width
- 56.34 in / 1431 mm
- Height
- 54.66 in / 1388.3 mm
- Weight
- 6950 lb / 3152 kg
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 1225 BHP / 914 bkW
- Displacement
- 1960.5 in³ / 32.1 l
- Minimum Rating
- 800 BHP / 597 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136
- Stroke
- 6.4 in / 162 mm
- Bore
- 5.7 in / 145 mm
- Emissions
- EPA and CARB Non-Road Mobile Tier 2, EPA Marine Tier 2, IMO Tier II, China Stage III
- Length
- 76.1 in / 1933 mm
- Width
- 57 in / 1488 mm
- Height
- 54.7 in / 1389 mm
- Weight
- 5084 lb / 2306 kg