908

Cat 908 Compact Wheel Loader

Studio Shot

DESCRIPTION

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Cat® 906, 907, 908 Next Generation Compact Wheel Loaders at Work

Cat® 906, 907, 908 Next Generation Compact Wheel Loaders | Features and Benefits

Construction | Cat® 906 Next Generation Compact Wheel Loader

Industrial Waste | Cat® 908 High Lift Next Generation Compact Wheel Loader

Landscaping Yard | Cat® 908 Next Generation Compact Wheel Loader

Cat® 906 Next Generation Compact Wheel Loader Removing Snow

New Cab Features | 906-907-908 Next Generation Cat® Compact Wheel Loaders

Performance Improvements | 906-907-908 Next Generation Cat® Compact Wheel Loaders

Operator Comfort and Controls | 906-907-908 Next Generation Cat® Compact Wheel Loaders

Machine Security | 906-907-908 Next Generation Cat® Compact Wheel Loaders

Powertrain Mode | 906-907-908 Next Generation Cat® Compact Wheel Loaders

Cat® 906, 907, 908 Next Generation Daily Maintenance and Inspection

Cab Evolution | Next Generation Cat® Compact Wheel Loaders

Cat® 908 Compact Wheel Loader | Customer Story

CONFIGURED FOR SUCCESS

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has ahigh torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand or emit equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

ENJOY ALL DAY COMFORT

  • All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
  • Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

EFFICIENTLY POWERFUL

  • Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
  • “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

WORK MADE EASY

  • All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

CUSTOMIZE YOUR EXPERIENCE

  • Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
  • Machine security is enhanced with a standard keycode or optional Bluetooth® technology.

PURPOSE BUILT SPECIALTY MODELS

  • Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
  • The 908 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

AFTERMARKET AND SERVICES

  • Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
  • Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
  • Integrated Technology available to reduce service costs and maintenance.

SUSTAINABILITY

  • The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
  • Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
  • Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
  • Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
  • Efficient HVAC regulates temperature control. No need to leave the machine running to cool the cab.
  • Shift on the go transmission, means no need to stop so you keep your momentum.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • POWER TRAIN
    • Emissions compliant, two options (Dependent on regional regulations.)
      – U.S. EPA Tier 4 Final and EU Stage V
      – U.S. EPA Tier 3 and EU Stage IIIA equivalent
    • Cat C2.8 engine
      – Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
      – Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
      – Hydrostatic transmission, two speed, with inching function, “shift on the go”
      – Power train mode, hystat
    • Air cleaner, two stage filter, with in cab audio/visual indicator on display
    • Axles, heavy duty, frame mounted with outboard planetary reduction
    • Closed circuit breather
    • Coolant, extended life, –36° C (–33° F)
    • Drive shaft, sealed for life, universal joints
    • Engine, auto idle shutdown, hibernation mode
    • Engine oil, ECO drain tap and hose
    • Fuel pump, priming (manual)/water separator/drain
  • HYDRAULICS
    • Hydraulic pilot shut off switch, in cab
    • Electro-hydraulic, fully proportional controls
    • Dead engine lower, lift valve, manual
    • Demand cooling fan, hydraulically drive
    • Coupler/pin on attachment ready
    • Caterpillar HYDO™ Advanced 10 hydraulic oil
    • Hystat displacement pump, infinitely variable
    • Implement valve, pressure compensated
    • Joystick, single lever, single auxiliary roller
    • Multi-function lift and tilt with loader arm float
    • Motor, single drive with dedicated implement and steering pumps
  • ELECTRICAL
    • Alternator, 100 amp sealed
    • Battery, heavy duty, 12V, 90Ah and 1,000 CCA
    • Battery disconnect switch
    • Cab mounted fuse panel
    • Lights, rear stop and turn, LED
    • Lights, roading, front halogen
    • Service (Electronic Technician™)
    • Product Link™
  • OPERATOR ENVIRONMENT
    • ROPS/FOPS certified canopy/cab
      – 12V power outlets, interior/exterior
      – Pedals, raised, foot, brake/inching, accelerator
      – Lever, parking brake
      – Cup holders (2)
      – CB radio clip, phone holder
      – Door release, internal (left and right)
      – Hook, large, coat and hard hat
      – Floormat, heavy duty, easy clean
      – Mirrors, (2) external breakaway, (1) internal
      – Operator station on isolation mounts
      – Steering wheel, spinner knob, horn in center
      – Seat belt, orange, retractable, 51 mm (2 in)
      – Storage, personal (trays [3], seat pocket)
      – Steering column, tilt adjusted
      – Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
      – Quick coupler switch, in cab
    • Display, analog and digital
      – Gauges (2), hydraulic oil, engine coolant
      – Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
    • Joystick, seat mounted, standard multifunction
      – FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
      – Arm rest, padded right, multiple position vertical height
    • Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
    • Cab
      – Doors (2), fixed glass
      – Wipers, front and rear, full front coverage
      – Windshield, front single piece
      – Window, rear heated
      – Radio ready, speakers and wiring
      – Air vents, (4) screen, (7) directional
      – Heating, mechanical control unit
      – Sun visor, solid, front full width
      – Interior light (incandescent)
  • OTHER
    • Fenders, front and rear
    • Ground level easy access daily service points
    • Loader arm safety brace
    • Lockable main and side engine enclosures
    • Lockable, fuel cap, HVAC filters, nose cone
    • Machine lifting/tie down points
    • Paint, Electro-Coat primer, gloss topcoat
    • Recovery hitch with pin
    • Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil

Optional Equipment

  • POWER TRAIN
    • Antifreeze, extended life coolant, –50° C (–58° F)
    • Cold start – jacket water heater, bypass valve
    • Creep and throttle lock function
    • Fuel pump, priming, electric (Dependent on regional regulations.)
    • 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
    • Power train mode, utility (includes keypad)
  • ELECTRICAL
    • Lighting packages, multiple; front, rear, engine bay (LED or HAL)
    • Push to start
    • Work tool wiring harness, (3) in cab switches
  • HYDRAULICS
    • Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
    • Caterpillar Bio HYDO Advanced hydraulic oil
    • Connect under pressure and case drain
    • Ride Control or load check valves*
    • Reversing fan
    • Quick disconnect auxiliary hydraulics
  • OPERATOR STATION
    • Air Conditioning, automatic temperature control (ATC)
    • Doors, sliding windows (left and right)
    • Interior light, door activated
    • Joystick, FNR, twin auxiliary roller, differential lock, horn
    • Joystick, seat mounted, multifunction
    • Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
    • Phone holder, spring loaded
    • Radio, FM or digital audio broadcast
    • Seat belt options, multiple
    • Seat packages; deluxe or premium
    • Secondary display, front or rear view camera
    • Soft touch keypad options, 8 or 16 button
    • Storage, lockable box or lockable cooled box
    • Sun visor, rear perforated
    • USB ports (2), interior
  • OTHER
    • Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
    • Rotary sensors (snubbing, kickouts, parallel)
    • High lift option

Specs

Overview

Long Name:
Cat 908 Compact Wheel Loader
Name:
908
Brand:
Cat
Status:
Current

Engine

Maximum Gross Power
74.7 hp / 55.7 kW
Engine Model
Cat C2.8*
Maximum Engine Speed
2550 rpm
Maximum Gross Power - Rated Engine Speed
2400 r/min / 2400 r/min
Maximum Gross Power - SAE J1995
74.7 hp / 55.7 kW
Maximum Gross Power - ISO 14396
74.3 hp / 55.4 kW
Maximum Gross Power - ISO 14396 (metric)
75.3 mhp / 75.3 mhp
Rated Net Power - Rated Engine Speed
2400 r/min / 2400 r/min
Rated Net Power - SAE J1349
72.7 hp / 54.2 kW
Rated Net Power - ISO 9249
72.1 hp / 53.8 kW
Rated Net Power - 2,400 rpm - ISO 9249 (metric)
73.1 mhp / 73.1 mhp
Maximum Gross Torque - SAE J1995
222 lb/ft / 300 N·m
Maximum Gross Torque - ISO 14396
221 lb/ft / 300 N·m
Maximum Net Torque - SAE J1349
218 lb/ft / 296 N·m
Maximum Net Torque - ISO 9249
217 lb/ft / 295 N·m
Displacement
171 in³ / 2.8 l
Bore
3.54 in / 90 mm
Stroke
4.33 in / 110 mm
Note
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (1)
Net power advertised is the power available at the flywheel.
Note (2)
*Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349) and 1 N·m/0.7 lb-ft higher on gross torque (SAE J1995).
Note (3)
#Maximum gross and net torque measured at 1,600 rpm.

Weights

Operating Weight
14617 lb / 6632 kg

Buckets

Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Multi-Purpose
0.75-1.1 m³ (1.0-1.4 yd³)
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Note
Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1)
Bucket capacities stated include BOCE, in line with ISO 7546.

Service Refill Capacities

Fuel Tank
24 Gal / 90 l
Cooling System
3.2 Gal / 12 l
Engine Crankcase
2.3 Gal / 8.8 l
Axles - Front Center Differential
2.3 Gal / 8.8 l
Axles - Rear Center Differential
2.3 Gal / 8.8 l
Hydraulic System - Including Tank
18.6 Gal / 70.5 l
Hydraulic Tank
11.8 Gal / 44.6 l
Transmission
0.6 Gal / 2.4 l
Note
No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Axles

Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Note
Oscillation of ±11 degrees via hitch between front and rear frames.

Steering

Steering Articulation Angle - Each Direction
39 ° / 39 °
Maximum Flow - Steering Pump
12.3 gal/min / 46.7 l/min
Maximum Working Pressure - Steering Pump
3336 psi / 23000 kPa
Steering Cycle Times – (full left to full right) – at High Idle
2.8 s / 2.8 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns

Transmission

Forward and Reverse - Speed Range Creep#
6 mile/h / 10 km/h
Forward and Reverse - Speed Range 1*
6 mile/h / 10 km/h
Forward and Reverse - Speed Range 2** - High Speed
10.5 mile/h / 17 km/h
Forward and Reverse - Speed Range 2** - Standard
12 mile/h / 20 km/h
Forward and Reverse - Speed Range 3***
25 mile/h / 40 km/h
Note
#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1)
*Creep function not available in this gear or above.
Note (2)
**Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3)
***Reverse is 30 km/h (19 mph).

Tires

Tire Size - Standard
*405/70 R20 SPT9
Tire Size - Optional
405/70 R20 Powerloads
Tire Size - Optional (1)
400/70 R20 XMCL/Bibload
Tire Size - Optional (2)
360/80 R20 TRI 2
Tire Size - Optional (3)
40X14-20 TL, SM/TR
Note
*This tire has been used for all dimension, stability and performance data.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.

Loader Hydraulic System

Main Relief - 1st Auxiliary (3rd slice)
3408 psi / 23500 kPa
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
24 gal/min / 90 l/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow*
33 gal/min / 125 l/min
Main Relief - 2nd Auxiliary (4th slice)
3408 psi / 23500 kPa
Main Relief - 2nd Auxiliary (4th slice) - Flow
12 gal/min / 45 l/min
Hydraulic Cycle Time - Rackback
2.5 s / 2.5 s
Hydraulic Cycle Time - Lift
5.8 s / 5.8 s
Hydraulic Cycle Time - Dump
1.8 s / 1.8 s
Hydraulic Cycle Time - Float Down
3.6 s / 3.6 s
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Dimensions - With HPL-V Coupler - Approximate#

Height: Ground to Cab**
8.75 ft / 2670 mm
Height: Ground to Beacon**
9.33 ft / 2849 mm
Height: Ground Axle Center**
1.67 ft / 519 mm
Height: Ground Clearance**
1 ft / 320 mm
Length: Overall*
18.17 ft / 5544 mm
Length: Rear Axle to Bumper
4.5 ft / 1391 mm
Length: Hitch to Front Axle
3.5 ft / 1085 mm
Length: Wheel Base
7.08 ft / 2170 mm
Clearance: Bucket at 45° *
8.58 ft / 2623 mm
Clearance: Load over Height**
9.75 ft / 2960 mm
Clearance: Level Bucket**
10.5 ft / 3206 mm
Height: Bucket Pin**
11.17 ft / 3412 mm
Height: Overall**
14.17 ft / 4313 mm
Reach: Bucket at 45° *
2.33 ft / 706 mm
Carry Height: Bucket Pin
1.17 ft / 367 mm
Dig Depth**
0.33 ft / 109 mm
Width: Bucket
6.75 ft / 2080 mm
Width: Tread Center
5.08 ft / 1570 mm
Turning Radius: Over Bucket
14.75 ft / 4493 mm
Width: Over Tires
6.67 ft / 2021 mm
Turning Radius: Outside of Tires
13.17 ft / 4005 mm
Turning Radius: Inside of Tires
6.5 ft / 1981 mm
Rack Angle at Full Lift
53°
Dump Angle at Full Lift
45°
Rack Angle at Carry
51°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
14633 lb / 6637 kg
Tipping Load - Straight - ISO 14397-1 †
10626 lb / 4820 kg
Tipping Load - Full Turn - ISO 14397-1 †
8895 lb / 4035 kg
Operating Weight: Carriage and Tines ^^
14252 lb / 6467 kg
Tipping Load - Straight †
10626 lb / 3297 kg
80% of Tip: Firm and Level EN474-3 ††
5815 lb / 2638 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Length: Front Axle to Front of Coupler
3.92 ft / 1200 mm

Dimensions - With SSL Coupler - Approximate

Height - Ground to Cab
8.75 ft / 2670 mm
Height: Ground to Beacon**
9.33 ft / 2849 mm
Height: Ground Axle Center**
1.67 ft / 519 mm
Height - Ground Clearance
1 ft / 320 mm
Length - Overall with Bucket
18.67 ft / 5707 mm
Length: Rear Axle to Bumper
4.5 ft / 1391 mm
Length: Hitch to Front Axle
3.5 ft / 1085 mm
Length - Wheel Base
7.08 ft / 2170 mm
Clearance - Bucket at 45°
8.25 ft / 2511 mm
Clearance: Load over Height**
9.75 ft / 2960 mm
Clearance - Level Bucket
10.5 ft / 3197 mm
Height - Bucket Pin
11.17 ft / 3412 mm
Height: Overall**
14.42 ft / 4403 mm
Reach - Bucket at 45°
2.67 ft / 811 mm
Carry Height: Bucket Pin
1.25 ft / 388 mm
Dig Depth
0.45 ft / 117 mm
Width - Bucket
6.75 ft / 2080 mm
Width - Tread Center
5.08 ft / 1570 mm
Turning Radius - Over Bucket
15.08 ft / 4607 mm
Width - Over Tires
6.67 ft / 2021 mm
Turning Radius: Outside of Tires
13.17 ft / 4005 mm
Turning Radius - Inside Tire
6.67 ft / 2033 mm
Rack Angle at Full Lift
50°
Dump Angle at Full Lift
48°
Rack Angle at Carry
54°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
14752 lb / 6691 kg
Tipping Load – Straight – ISO 14397-1 †
9581 lb / 4347 kg
Tipping Load – Full Turn – ISO 14397-1 †
8141 lb / 3693 kg
Operating Weight: Carriage and Tines ^^
14391 lb / 6530 kg
Tipping Load - Straight †
9753 lb / 4424 kg
80% of Tip: Firm and Level EN474-3 ††
5438 lb / 2468 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Tipping Load - Full Turn - ISO 14397-1†
6800 lb / 3085 kg
Length: Front Axle to Front of Coupler
4.75 ft / 1436 mm

Dimensions - High Lift - With HPL-V Coupler - Approximate#

Height: Ground to Cab**
8.75 ft / 2670 mm
Height: Ground to Beacon**
9.33 ft / 2849 mm
Height: Ground Axle Center**
1.67 ft / 519 mm
Height: Ground Clearance**
1 ft / 320 mm
Length: Overall*
19.67 ft / 6000 mm
Length: Rear Axle to Bumper
4.5 ft / 1391 mm
Length: Hitch to Front Axle
3.5 ft / 1085 mm
Length: Wheel Base
7.08 ft / 2170 mm
Clearance: Bucket at 45° *
10.92 ft / 3338 mm
Clearance: Load over Height**
10.75 ft / 3282 mm
Clearance: Level Bucket**
12.08 ft / 3693 mm
Height: Bucket Pin**
12.75 ft / 3898 mm
Height: Overall**
15.67 ft / 4769 mm
Reach: Bucket at 45° *
3.25 ft / 990 mm
Carry Height: Bucket Pin
1.17 ft / 367 mm
Dig Depth**
0.33 ft / 109 mm
Width: Bucket
6.75 ft / 2045 mm
Width: Tread Center
5.08 ft / 1570 mm
Turning Radius: Over Bucket
15.83 ft / 4825 mm
Width: Over Tires
6.67 ft / 2021 mm
Turning Radius: Outside of Tires
13.17 ft / 4005 mm
Turning Radius: Inside of Tires
6.5 ft / 1981 mm
Rack Angle at Full Lift
69°
Dump Angle at Full Lift
40°
Rack Angle at Carry
48°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
14848 lb / 6735 kg
Tipping Load - Straight - ISO 14397-1 †
9187 lb / 4167 kg
Tipping Load - Full Turn - ISO 14397-1 †
7645 lb / 3468 kg
Operating Weight: Carriage and Tines ^^
14542 lb / 6596 kg
Tipping Load - Straight †
9187 lb / 4167 kg
80% of Tip: Firm and Level EN474-3 ††
4706 lb / 2135 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Dimensions - High Lift - With SSL Coupler - Approximate

Height: Ground to Cab**
8.75 ft / 2670 mm
Height: Ground to Beacon**
9.33 ft / 2849 mm
Height: Ground Axle Center**
1.67 ft / 519 mm
Height: Ground Clearance**
1 ft / 320 mm
Length: Overall*
20.17 ft / 6157 mm
Length: Rear Axle to Bumper
4.5 ft / 1391 mm
Length: Hitch to Front Axle
3.5 ft / 1085 mm
Length: Wheel Base
7.08 ft / 2170 mm
Clearance: Bucket at 45° *
10.42 ft / 3181 mm
Clearance: Load over Height**
10.75 ft / 3282 mm
Clearance: Level Bucket**
12.08 ft / 3684 mm
Height: Bucket Pin**
12.75 ft / 3898 mm
Height: Overall**
15.92 ft / 4859 mm
Reach: Bucket at 45° *
3.42 ft / 1048 mm
Carry Height: Bucket Pin
1.25 ft / 388 mm
Dig Depth**
0.42 ft / 117 mm
Width: Bucket
6.75 ft / 2045 mm
Width: Tread Center
5.08 ft / 1570 mm
Turning Radius: Over Bucket
16.17 ft / 4919 mm
Width: Over Tires
6.67 ft / 2021 mm
Turning Radius: Outside of Tires
13.17 ft / 4005 mm
Turning Radius: Inside of Tires
6.5 ft / 1981 mm
Rack Angle at Full Lift
66°
Dump Angle at Full Lift
40°
Rack Angle at Carry
42°
Departure Angle - Degrees
30°
Articulation Angle - Degrees
39°
Operating Weight: Bucket ^
15070 lb / 6836 kg
Tipping Load - Straight - ISO 14397-1 †
8385 lb / 3803 kg
Tipping Load - Full Turn - ISO 14397-1 †
6943 lb / 3149 kg
Operating Weight: Carriage and Tines ^^
14714 lb / 6674 kg
Tipping Load - Straight †
8385 lb / 3803 kg
80% of Tip: Firm and Level EN474-3 ††
4375 lb / 1984 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Sustainability

Recyclability
93%

SEE HOW 908 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Compact Wheel Loaders
908
Studio Shot
Brand
Cat
Status
Current
Maximum Gross Power
74.7 hp / 55.7 kW
Engine Model
Cat C2.8*
Maximum Gross Power - Rated Engine Speed
2400 r/min / 2400 r/min
Maximum Gross Power - ISO 14396
74.3 hp / 55.4 kW
Maximum Gross Power - ISO 14396 (metric)
75.3 mhp / 75.3 mhp
Rated Net Power - Rated Engine Speed
2400 r/min / 2400 r/min
Rated Net Power - SAE J1349
72.7 hp / 54.2 kW
Rated Net Power - ISO 9249
72.1 hp / 53.8 kW
Maximum Gross Torque - SAE J1995
222 lb/ft / 300 N·m
Maximum Gross Torque - ISO 14396
221 lb/ft / 300 N·m
Maximum Net Torque - SAE J1349
218 lb/ft / 296 N·m
Maximum Net Torque - ISO 9249
217 lb/ft / 295 N·m
Displacement
171 in³ / 2.8 l
Bore
3.54 in / 90 mm
Stroke
4.33 in / 110 mm
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Operating Weight
14617 lb / 6632 kg
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Fuel Tank
24 Gal / 90 l
Cooling System
3.2 Gal / 12 l
Engine Crankcase
2.3 Gal / 8.8 l
Axles - Front Center Differential
2.3 Gal / 8.8 l
Axles - Rear Center Differential
2.3 Gal / 8.8 l
Hydraulic System - Including Tank
18.6 Gal / 70.5 l
Hydraulic Tank
11.8 Gal / 44.6 l
Transmission
0.6 Gal / 2.4 l
Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Steering Articulation Angle - Each Direction
39 ° / 39 °
Maximum Flow - Steering Pump
12.3 gal/min / 46.7 l/min
Maximum Working Pressure - Steering Pump
3336 psi / 23000 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns
Forward and Reverse - Speed Range 1*
6 mile/h / 10 km/h
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Hydraulic Cycle Time - Rackback
2.5 s / 2.5 s
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Recyclability
93%
Selected Model
Compact Wheel Loaders
907
Studio Shot
Brand
Cat
Status
Current
Maximum Gross Power
74.7 hp / 55.7 kW
Engine Model
Cat C2.8*
Maximum Gross Power - Rated Engine Speed
2400 r/min / 2400 r/min
Maximum Gross Power - ISO 14396
74.3 hp / 55.4 kW
Maximum Gross Power - ISO 14396 (metric)
75.3 mhp / 75.3 mhp
Rated Net Power - Rated Engine Speed
2400 r/min / 2400 r/min
Rated Net Power - SAE J1349
72.7 hp / 54.2 kW
Rated Net Power - ISO 9249
72.1 hp / 53.8 kW
Maximum Gross Torque - SAE J1995
222 lb/ft / 300 N·m
Maximum Gross Torque - ISO 14396
221 lb/ft / 300 N·m
Maximum Net Torque - SAE J1349
218 lb/ft / 296 N·m
Maximum Net Torque - ISO 9249
217 lb/ft / 295 N·m
Displacement
171 in³ / 2.8 l
Bore
3.54 in / 90 mm
Stroke
4.33 in / 110 mm
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Operating Weight
12765 lb / 5792 kg
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Fuel Tank
24 Gal / 90 l
Cooling System
3.2 Gal / 12 l
Engine Crankcase
2.3 Gal / 8.8 l
Axles - Front Center Differential
2.3 Gal / 8.8 l
Axles - Rear Center Differential
2.3 Gal / 8.8 l
Hydraulic System - Including Tank
17.8 Gal / 67.5 l
Hydraulic Tank
11.8 Gal / 44.6 l
Transmission
0.6 Gal / 2.4 l
Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Steering Articulation Angle - Each Direction
39 ° / 39 °
Maximum Flow - Steering Pump
12.3 gal/min / 46.7 l/min
Maximum Working Pressure - Steering Pump
3336 psi / 23000 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns
Forward and Reverse - Speed Range 1*
6 mile/h / 10 km/h
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Hydraulic Cycle Time - Rackback
2.2 s / 2.2 s
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Recyclability
93%
More Details
Compact Wheel Loaders
910
Studio Shot
Brand
Cat
Status
Current
Maximum Gross Power
110 hp / 82 kW
Engine Model
Cat C3.6
Maximum Gross Power - Rated Engine Speed
1800 r/min / 1800 r/min
Maximum Gross Power - ISO 14396
110 hp / 82 kW
Maximum Gross Power - ISO 14396 (metric)
112 hp / 112 hp
Rated Net Power - Rated Engine Speed
2200 r/min / 2200 r/min
Rated Net Power - SAE J1349
99 hp / 74 kW
Rated Net Power - ISO 9249
98 hp / 73 kW
Maximum Gross Torque - SAE J1995
335 ft·lbf / 454 N·m
Maximum Gross Torque - ISO 14396
332 ft·lbf / 450 N·m
Maximum Net Torque - SAE J1349
329 ft·lbf / 446 N·m
Maximum Net Torque - ISO 9249
327 ft·lbf / 443 N·m
Displacement
220 in³ / 3.6 l
Bore
3.85 in / 98 mm
Stroke
4.72 in / 120 mm
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Operating Weight
18102 lb / 8109 kg
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Fuel Tank
43.6 gal (US) / 165 l
Cooling System
5.7 gal (US) / 21.5 l
Engine Crankcase
2.6 gal (US) / 10 l
Axles - Front Center Differential
2 gal (US) / 7.5 l
Axles - Rear Center Differential
2 gal (US) / 7.5 l
Hydraulic System - Including Tank
25.9 gal (US) / 98 l
Hydraulic Tank
14.5 gal (US) / 55 l
Transmission
0.8 gal (US) / 3.2 l
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Steering Articulation Angle - Each Direction
40 ° / 40 °
Maximum Flow - Steering Pump
17 gal/min / 66 l/min
Maximum Working Pressure - Steering Pump
2683 psi / 18500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns / 3.75 turns
Forward and Reverse - Speed Range 1*
6.3 mile/h / 10 km/h
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Hydraulic Cycle Time - Rackback
2.2 s / 2.2 s
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Recyclability
95%
More Details