836

836 Landfill Compactor

Cat® 836 landfill compactors dozer blade and tamping foot design maximize waste spreading and compacting, conserving airspace to extend a landfill's life span.

836 Landfill Compactor

DESCRIPTION

The Cat® 836 Landfill Compactor is designed with heavy-duty main structures that support multiple life cycles, features a Cat C18 engine, single-lever steering, pressurized cab, and wheel/tip options that help provide extended service life. Available Cat Compact Technologies further enhance compaction performance and consistency by providing accurate compaction values and 3D mapping.Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1993, the 836 has been an industry leader for over 30 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 836 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

        
  • Flip-up armrest for easy ingress/egress.
    •     
  • Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
    •     
  • Enhanced visibility with standard rearview camera.
    •     
  • Preferred temperature settings maintained with automatic climate control.
    •     
  • Cat Premium Plus seat with standard features including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to help provide total comfort throughout the workday.
    •     
  • Increased forward visibility with lowered glass for better visibility to the blade and wheels.

Cat 836 Landfill Compactor
Cat 836 Landfill Compactor

        
  • Easy access and in a controlled environment; electronics bay is located inside the cab.
    •     
  • Focused on safety with ground level or platform access to most major components.
    •     
  • Ground level: emergency shutdown, battery disconnect, and jump start.
    •     
  • Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
    •     
  • Electronic air inlet restriction indicator.
    •     
  • Designed for ease of service and inspection– Hydraulic oil cooler, fuel cooler, and roof-mounted condenser– Centralized grease points.
    •     
  • Operators and technicians can resolve any problems before failure using VIMS.
    •     
  • Underhood lighting for improved visibility of service points.
    •     
  • Improved guarding around the axles mitigates risk of damaged components.
    •     
  • Improved radiator air inlet door sealing to help reduce radiator cleanout.
    •     
  • Remaining useful life of the engine air filter helps allow for better planning of maintenance and repair activities.

        
  • Improved performance, long life, low emissions.
    •     
  • High productivity and fuel efficient.
    •     
  • Two engine options available that meet U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards or Brazil MAR-1 and China Nonroad Stage III emission standards, U.S. EPA Tier 3 and EU Stage IIIA equivalent.
    •     
  • For the Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
    •     
  • Regeneration is completely automatic and does not interrupt the machine’s work cycle.
    •     
  • Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
    •     
  • Conserve more fuel with the automatic engine and electrical system shutdown.
    •     
  • Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points advanced productivity electronic control system (APECS) transmission controls.
    •     
  • Operators experience less fatigue with throttle lock to maintain engine speed.
    •     
  • Equipped with Cat torque converter with lock-up clutch which eliminates torque converter (TC) losses while lowering system heat and transfers more power to the ground.
    •     
  • Improved direction shift speed with new Cat locker differentials.
    •     
  • Diesel exhaust fluid (DEF) injector phase change tank to reduce engine idle time at shutdown.
    •     
  • Increase machine tarp lift capability to eliminate need for track type tractor to carry tarp rolling equipment for end of day landfill cover.

Cat 836 Landfill Compactor
Cat 836 Landfill Compactor

        
  • Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
    •     
  • Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
    •     
  • Improved productivity with standard Cat Compact with Pass Mapping and 10" display.
    •     
  • Slope indicate feature helps improve construction of slopes and identifies when risk for fluid cavitation occurs.
    •     
  • Improved productivity with optional Cat Compact with Elevation Mapping.

        
  • Larger diameter axle shafts, the Cat locker differentials, improved duo cone labyrinth, thicker wheel at the spindle for increased strength.
    •     
  • Improved final drive gear set to help reduce stress and enhance pitting life.
    •     
  • Fan motor guard to help prevent bag wrapping.
    •     
  • 5" higher efficiency fuel filter for cleaner fuel to the engine.

Cat 836 Landfill Compactor
Cat 836 Landfill Compactor

        
  • Designed specifically to complement Cat machines.
    •     
  • Improves machine performance through longer wear life and maintaining traction.
    •     
  • Five wheel and tip configurations are available to meet your particular application:
        1) Paddle Tip – High performance and less fuel burn with more traction and less weight.
        2) Plus Tip – Traditional design for increased side slope stability.
        3) Combination Tip – Both paddle and plus tips help provide the best compromise of performance and fuel economy with side slope stability.
        4) Diamond Tip – Longest life tip on the market with reputation of reliability that is world class in the waste tip industry.
        5) Chopper Tip – These types of tips are recommended for wet/soft waste where chopping and/or traction is a large concern and abrasive wear life is not a major concern.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN
    • Advanced Productivity Electronic Control Shifting (APECS)
    • Air to air aftercooler
    • Brakes, fully hydraulic, enclosed, wet multiple disc brakes
    • Cat Clean Emission Module, insulated (Tier 4 Final/Stage V/Korea Stage V and Japan 2014)
    • Electro hydraulic parking brake
    • Engine, Cat C18: – Tier 4 Final/Stage V/Korea Stage V and Japan 2014 – Tier 3/Stage IIIA equivalent
    • Fuel priming pump, electric
    • Fuel to air cooler
    • Ground level engine shutoff
    • Guard (3 piece) transmission
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking
    • Radiator, Aluminum Modular Radiator (AMR)
    • Separated cooling system
    • Starting aid (ether) automatic
    • Throttle lock
    • Torque converter with lockup clutch (LUC)
    • Turbine precleaner, engine air intake
    • Transmission, planetary, with 2F/2R speed range control
    • Underhood ventilation system
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4-1,000 CCA)
    • Converter, 10-15 amp, 24V to 12V
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Starter, electric (heavy duty)
    • Starter lockout (ground level)
    • Starting receptacle for emergency start
    • Transmission lockout (ground level)
  • OPERATOR ENVIRONMENT
    • Air conditioner w/roof-mounted condenser
    • Cab, sound-suppressed and pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp) 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Coat and hard hat hooks
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Hydraulic controls (floor mounted)
    • Implement hydraulic lockout
    • Laminated glass
    • Light, (dome) cab
    • Lunchbox and beverage holders
    • Instrumentation, Gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, Warning Indicators: – Action alert system, three category – Axle/brake oil temp, front – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp
    • Mirrors, rearview (externally mounted)
    • Parking brake status
    • Radio, CB (ready)
    • Seat, Cat Comfort, (cloth) air suspension
    • Seat belt, retractable, 76 mm (3") wide
    • STIC Control System with steering lock
    • Sun visor, front
    • Glass (window) - rubber mounted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS) with graphical information display: external data port, customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
  • WHEELS
    • Wheels, paddle, plus, combination, and diamond wheel configurations
  • GUARDS
    • Guards, axle (front and rear)
    • Guards, cab window
    • Guards, crankcase and power train, hydraulically powered
    • Guards, rear fan and grill
  • BLADES
    • Bulldozer arrangement is included in the standard equipment. Bulldozer blades are optional.
  • FLUIDS
    • Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • OTHER STANDARD EQUIPMENT
    • Auto Blade Positioner (ABP)
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access locking
    • Ecology drains for engine, radiator, hydraulic tank
    • Electronic clutch pressure control and remote mounted pressure taps
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Fuel tank, 793 L (210 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Hydraulic oil cooler
    • Hydraulic, steering and brake filtration/screening system
    • Oil sampling valves
    • Product Link™ - Cellular
    • Stairways, fixed-L/R (rear access)
    • Steering, load sensing
    • Vandalism protection caplocks
    • Venturi stack

Optional Equipment

Specs

Overview

Long Name:
836 Landfill Compactor
Name:
836
Brand:
Caterpillar
Status:
Current

Engine

Gross Power - SAE J1995:2014
562 hp / 419 kW
Net Power - SAE J1349:2011
496 hp / 370 kW
Net Power – ISO 9249:2007
502 hp / 374 kW
Engine Power - ISO 14396:2002
553 hp / 412 kW
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Engine Model
C18
Rated Speed
1900 rpm
Peak Torque ( 1,400 rpm )
2275 lbf·ft / 3085 N·m
Torque Rise
52%
Bore
5.71 in / 145 mm
Stroke
7.2 in / 183 mm
Displacement
1104.5 in³ / 18.1 l
High Idle Speed
2120 r/min / 2120 r/min
Low Idle Speed
750 r/min / 750 r/min
Maximum Altitude - Without Derating
7500 ft / 2286 m
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Specifications

Operating Weight (Tier 4 Final/Stage V)
124063 lb / 56275 kg
Operating Weight (Tier 3/Stage IIIA equivalent)
123321 lb / 55939 kg
Maximum Operating Weight (Tier 4 Final/Stage V)
126364 lb / 57318 kg
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
125622 lb / 56982 kg

Transmission

Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
4.3 mile/h / 7 km/h
Direct Drive - Forward 2
7.8 mile/h / 12.6 km/h
Direct Drive - Reverse 1
4.6 mile/h / 7.4 km/h
Direct Drive - Reverse 2
8.2 mile/h / 13.2 km/h

Hydraulic System - Lift

Lift System - Circuit
Flow Sharing Implement; Pilot Operated LS Valve w/EH
Lift System - Pump
Variable displacement piston
Max Flow @ 2000 rpm
79 gal/min / 300 l/min
Relief Valve Setting - Lift
4206 psi / 29000 kPa
Cylinders, Double Acting: Lift, Bore, Stroke
137.9 mm x 1021 mm (5.5 in x 40.2 in)
Pilot System
Variable displacement piston
Pilot Relief Valve Setting
551 psi / 3800 kPa

Hydraulic System - Steering

Steering System - Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System - Pump
Piston – Variable Displacement
Max Flow @ 2000 rpm
79 gal/min / 300 l/min
Relief Valve Setting - Steering
3495 lb/in² / 24100 kPa
Total Steering Angle
86
Steering Cycle Times - High Idle
3.9 s / 3.9 s
Steering Cycle Times - Low Idle
6.4 s / 6.4 s

Service Refill Capacities

Fuel Tank
209 gal (US) / 793 l
Diesel Exhaust Fluid Tank
9 gal (US) / 32.8 l
Cooling Systems - Tier 4 Final/EU Stage V
40 gal (US) / 151.5 l
Cooling System - Tier 3/Stage IIIA Equivalent
37.2 gal (US) / 141.1 l
Engine Crankcase
16 gal (US) / 60 l
Transmission
21.9 gal (US) / 83 l
Differential - Final Drives - Front
49 gal (US) / 186 l
Differential - Final Drives - Rear
50 gal (US) / 190 l
Hydraulic System - Implement/Steering
46.2 gal (US) / 175 l
Hydraulic Tank Only
27.2 gal (US) / 103 l
Note
- All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specificiations. - Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. - Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.4 kg of refrigerant which has a CO2 equivalent of 2.002 metric tonnes.

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°

Braking System

Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V

Operator Sound Level (ISO 6396:2008) - Standard
72 dB(A) / 72 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
111 dB(A) / 111 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A) / 72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
109 dB(A) / 109 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Level (ISO 6396:2008) - Standard
72 dB(A) / 72 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
112 dB(A) / 112 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A) / 72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A) / 110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Dimensions (Approximate)

Height to Top of Beacon
15.2 ft / 4634 mm
Height to Top of Air Conditioning Condenser
15.2 ft / 4626 mm
Height - Cab Roof
14.1 ft / 4285 mm
Height - Top of Exhaust Pipe
15.1 ft / 4606 mm
Height - Top of Hood
11.3 ft / 3430 mm
Ground Clearance to Hitch
2.1 ft / 639 mm
Ground Clearance to Transmission Guard
2.1 ft / 634 mm
Ground Clearance to Bottom of Bumper
3.2 ft / 965 mm
Centerline of Rear Axle to Rear Compactor Guard
11.3 ft / 3454 mm
Hitch to Centerline of Front Axle
7.5 ft / 2275 mm
Wheel Base
14.9 ft / 4550 mm
Width over Front Striker Bars
12.9 ft / 3930 mm
Width over Rear Striker Bars
12.9 ft / 3933 mm
Width over Platform
10.5 ft / 3196 mm
Width over Drums
14 ft / 4280 mm
Overall Machine Length with Semi U-Blade
35.8 ft / 10914 mm

Straight Blade

Capacity
25.9 yd³ / 19.8 m³
Overall Width
17 ft / 5193 mm
Height
7.4 ft / 2260 mm
Height of Cutting Edge
3.7 ft / 1125 mm
Digging Depth
1.2 ft / 364 mm
Ground Clearance
5.7 ft / 1730 mm
Turning Radius – Outside Corner of Blade
28.7 ft / 8737 mm
Turning Radius - Inside of Wheels
11.9 ft / 3635 mm
Weight
6894 lb / 3127 kg
Total Operating Weight
123000 lb / 55792 kg

Semi U-Blade

Capacity
29.3 yd³ / 22.4 m³
Overall Width
17.4 ft / 5313 mm
Height
7.5 ft / 2294 mm
Height of Cutting Edge
4.1 ft / 1255 mm
Digging Depth
1.2 ft / 362 mm
Ground Clearance
5.7 ft / 1735 mm
Turning Radius – Outside Corner of Blade
28.9 ft / 8823 mm
Turning Radius – Inside of Wheels
11.9 ft / 3635 mm
Weight
7963 lb / 3612 kg
Total Operating Weight
124063 lb / 56275 kg

U-Blade

Capacity
33.6 yd³ / 25.7 m³
Overall Width
17.4 ft / 5290 mm
Height
7.2 ft / 2204 mm
Height of Cutting Edge
4.1 ft / 1255 mm
Digging Depth
3.1 ft / 934 mm
Ground Clearance
3.9 ft / 1198 mm
Turning Radius – Outside Corner of Blade
28.8 ft / 8795 mm
Turning Radius – Inside of Wheels
11.9 ft / 3635 mm
Weight
7696 lb / 3491 kg
Total Operating Weight
123785 lb / 56149 kg

Wheels

Combination Tips (Weight Group)
28250 lb / 12814 kg
Plus Tips - Weight (Group)
29784 lb / 13510 kg
Paddle Tips - Weight (Group)
272227 lb / 12350 kg
Chopper Tips (Weight Group)
28404 lb / 12884 kg
Diamond Tips Weight (Group)
32659 lb / 14814 kg
Outside Diameter
83.8 in / 2128 mm
Outside Diameter - Diamond
84.3 in / 2140 mm
Drum Diameter
69.7 in / 1770 mm
Drum Width
55.1 in / 1400 mm
Feet Per Row
8
Feet Per Wheel
40
Replaceable
Weld on
Width Over Drums
4280 mm / 168.5 in
Tip Height
179 mm / 7 in
Tip Height - Diamond
7.25 in / 184 mm

SEE HOW 836 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Landfill Compactors
836
836 Landfill Compactor
Brand
Caterpillar
Status
Current
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Engine Model
C18
Rated Speed
1900 rpm
Torque Rise
52%
Bore
5.71 in / 145 mm
Stroke
7.2 in / 183 mm
Displacement
1104.5 in³ / 18.1 l
High Idle Speed
2120 r/min / 2120 r/min
Low Idle Speed
750 r/min / 750 r/min
Note
- All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specificiations. - Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. - Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Transmission Type
Planetary - Powershift - ECPC
Steering System - Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System - Pump
Piston – Variable Displacement
Fuel Tank
209 gal (US) / 793 l
Engine Crankcase
16 gal (US) / 60 l
Transmission
21.9 gal (US) / 83 l
Differential - Final Drives - Front
49 gal (US) / 186 l
Differential - Final Drives - Rear
50 gal (US) / 190 l
Hydraulic Tank Only
27.2 gal (US) / 103 l
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Spring Applied, Hydraulic Released
Height to Top of Air Conditioning Condenser
15.2 ft / 4626 mm
Height - Cab Roof
14.1 ft / 4285 mm
Height - Top of Exhaust Pipe
15.1 ft / 4606 mm
Height - Top of Hood
11.3 ft / 3430 mm
Hitch to Centerline of Front Axle
7.5 ft / 2275 mm
Wheel Base
14.9 ft / 4550 mm
Combination Tips (Weight Group)
28250 lb / 12814 kg
Plus Tips - Weight (Group)
29784 lb / 13510 kg
Paddle Tips - Weight (Group)
272227 lb / 12350 kg
Outside Diameter
83.8 in / 2128 mm
Drum Diameter
69.7 in / 1770 mm
Drum Width
55.1 in / 1400 mm
Feet Per Row
8
Feet Per Wheel
40
Replaceable
Weld on
Width Over Drums
4280 mm / 168.5 in
Tip Height
179 mm / 7 in
Selected Model
Landfill Compactors
826
826 Landfill Compactor
Brand
Caterpillar
Status
Current
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Engine Model
C15 Cat®
Rated Speed
1800
Torque Rise
33%
Bore
4.5 in / 114.3 mm
Stroke
22.7 in / 576 mm
Displacement
927.6 in³ / 15.2 l
High Idle Speed
2300 r/min / 2300 r/min
Low Idle Speed
800 r/min / 800 r/min
Note
All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications.– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.– Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Transmission Type
Planetary - Powershift - ECPC
Steering System - Circuit
Double Acting - End Mounted
Steering System - Pump
Piston - Variable Displacement
Fuel Tank
206.6 gal (US) / 782 l
Engine Crankcase
9 gal (US) / 34 l
Transmission
17.4 gal (US) / 66 l
Differential - Final Drives - Front
26.4 gal (US) / 100 l
Differential - Final Drives - Rear
29.1 gal (US) / 110 l
Hydraulic Tank Only
35.4 gal (US) / 134 l
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Height to Top of Air Conditioning Condenser
14.99 ft / 4568 mm
Height - Cab Roof
13.75 ft / 4193 mm
Height - Top of Exhaust Pipe
14.56 ft / 4439 mm
Height - Top of Hood
10.87 ft / 3312 mm
Hitch to Centerline of Front Axle
6.07 ft / 1850 mm
Wheel Base
12.14 ft / 3700 mm
Combination Tips (Weight Group)
21125 lb / 9582 kg
Plus Tips - Weight (Group)
22002 lb / 9980 kg
Paddle Tips - Weight (Group)
20540 lb / 9317 kg
Outside Diameter
77.6 in / 1971 mm
Drum Diameter
63.4 in / 1610 mm
Drum Width
47.2 in / 1200 mm
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm / 149.6 in
Tip Height
179 mm / 7 in
More Details
Landfill Compactors
816
816 Landfill Compactor
Brand
Caterpillar
Status
Current
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat C7.1
Rated Speed
2200 r/min / 2200 r/min
Torque Rise
26%
Bore
4.1 in / 105 mm
Stroke
5.3 in / 135 mm
Displacement
427.8 in³ / 7.01 l
High Idle Speed
2270 r/min / 2270 r/min
Low Idle Speed
800 r/min / 800 r/min
Note
All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.
Transmission Type
Cat Planetary Power Shift
Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston – Variable Displacement
Fuel Tank
132.1 gal (US) / 500 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission
14.8 gal (US) / 56 l
Differential - Final Drives - Front
11.4 gal (US) / 43 l
Differential - Final Drives - Rear
11.4 gal (US) / 43 l
Hydraulic Tank Only
19.8 gal (US) / 75 l
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°
Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Height to Top of Air Conditioning Condenser
13.7 ft / 4161 mm
Height - Cab Roof
12.7 ft / 3878 mm
Height - Top of Exhaust Pipe
11.6 ft / 3547 mm
Height - Top of Hood
9.1 ft / 2770 mm
Hitch to Centerline of Front Axle
5.5 ft / 1675 mm
Wheel Base
11 ft / 3350 mm
Combination Tips (Weight Group)
13554 lb / 6148 kg
Plus Tips - Weight (Group)
13982 lb / 6342 kg
Paddle Tips - Weight (Group)
13126 lb / 5954 kg
Outside Diameter
67.6 in / 1717 mm
Drum Diameter
55.1 in / 1400 mm
Drum Width
40 in / 1016 mm
Feet Per Row
5
Feet Per Wheel
20
Replaceable
Weld On
Width Over Drums
131.4 in / 3338 mm
Tip Height
6.25 in / 159 mm
More Details