816

816 Landfill Compactor

Cat® 816 landfill compactors dozer blade and tamping foot design maximize waste spreading and compacting, conserving airspace to extend a landfill's life span.

816 Landfill Compactor

DESCRIPTION

Purpose-built for landfill operation, the Cat 816 delivers features, performance and efficiency that come from over 50-plus years of industry leadership. Field-proven protection and integrated technologies provide peak availability and optimized landfill performance.Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1972, the 816 has been the industry leader for over 50 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 816 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Investing In The Life Of Your Landfill

816 Introduction Video

816 – Landfill Compactor – In the Iron with Mark and Travis - Walkaround

Cat® 816 Landfill Compactor | Key Serviceability Highlights

  • Improved ingress/egress with a totally redesigned cab with flip up armrest.
  • Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
  • Safety and visibility enhanced with standard rearview camera.
  • Preferred temperature settings maintained with automatic climate control.
  • Operator productivity enhanced with new membrane switch panels, keyed ignition, and E-H parking brake switch.
  • Improved comfort with low operator sound levels.
  • Improved spectator sound levels and optional low sound packages.

Cat 816 Landfill Compactor
Cat 816 Landfill Compactor

  • Easier access and in a controlled environment; electronics bay is located inside the cab.
  • Focused on safety with ground level or platform access to most major components.
  • Ground level: emergency shutdown, battery disconnect, and jump start.
  • Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
  • Electronic air inlet restriction indicator.
  • Designed for ease of service and inspection.
    – Hydraulic oil cooler, fuel cooler, and condenser grouped together
    – Centralized grease points
  • Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).

  • Reliable performance, long life, low emissions.
  • High productivity and fuel efficient.
  • Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 3 and EU Stage IIIA equivalent.
  • For the Tier 4 Final and Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing SCR technology.
  • Regeneration is completely automatic and does not interrupt the machine’s work cycle.
  • Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
  • Conserve more fuel with the automatic engine and electrical system shutdown.
  • Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points with the all new Advanced Productivity Electronic Control System (APECS) transmission controls.
  • Operators experience less fatigue with throttle lock to maintain engine speed.

Cat 816 Landfill Compactor
Cat 816 Landfill Compactor

  • Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
    -Optional 3D mapping system available
  • Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.

  • Designed specifically to complement Cat machines.
  • Improves machine performance through longer wear life and maintaining traction.
  • Three wheel and tip configurations are available to meet your
  • particular application:
    1) Paddle Tip – High performance and less fuel burn with more traction and less weight.
    2) Plus Tip – Traditional design for increased side slope stability.
    3) Combination Tip – Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.

Cat 816 Landfill Compactor Wheel
  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWERTRAIN
    • Advanced Productivity Electronic Control Shifting (APECS)
    • Air-to-air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat clean emission module (U.S. EPA Tier 4 Final/EU Stage V only)
    • Electro-hydraulic parking brake
    • Electronic Clutch Pressure Control (ECPC)
    • Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage V or emitting equivalent to Tier 3/Stage IIIA
    • Engine driven cooling fan (suction)
    • Fuel priming pump (electric)
    • Fuel-to-air cooler
    • Ground level engine shutdown
    • Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
    • Radiator, unit core
    • Starting aid (ether)
    • Throttle lock
    • Transmission, planetary with 2F/2R speed range control
    • Torque converter
  • ELECTRICAL
    • Alarm, back-up
    • Alternator (150 amp)
    • Batteries, maintenance free
    • Electrical system (24 volt)
    • Ground level lockable master disconnect switch
    • Light, warning unswitched (LED strobe)
    • Lighting system (front and rear)
    • Starter, electric
    • Auxiliary start receptacle
  • OPERATOR ENVIRONMENT
    • 12-volt power port for mobile phone or laptop connection
    • Air conditioner with roof-mounted condenser
    • Cab, sound-suppressed pressurized
    • Camera, rear vision
    • Coat and hard hat hooks
    • Fingertip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Electro-hydraulic controls – floor mounted
    • Implement hydraulic lockout
    • Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V only) – engine coolant temperature – fuel level – hydraulic oil temperature – speedometer/tachometer – torque convertor temperature
    • Instrumentation, warning indicators: – action alert system, three categories – brake oil pressure – electrical system, low voltage – engine failure malfunction alert and action lamp – parking brake status
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Light, (dome) cab
    • Lunchbox and beverage holders
    • Mirror, internal (panoramic)
    • Mirrors, heated rearview (externally mounted)
    • Radio, CB (ready)
    • Radio ready for entertainment: – antenna – speakers – converter (12-volt 10-15 amp)
    • Seat belt with minder, retractable, 76 mm (3") wide
    • Steering and Transmission Integrated Control (STIC™) system with lockout
    • Sun visor, front
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS™): – graphical information display – external data port – customizable operator profiles – event indicator light on rear grill
    • Wet-arm wipers/washers (front and rear): – intermittent wipers (front and rear)
    • Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
    • Cab glass, laminated and tinted, rubber mounted
    • Horn group (trumpet)
    • Mirrors – cab: – Standard or heated
    • Precleaner, cab powered
    • Seat – cab: – Standard or heated and ventilated
  • GUARDS
    • Guard, radiator
    • Guards, axle (front and rear)
    • Guard, cab window
    • Guards, crankcase and power train, hinged
    • Guard, driveshaft
  • FLUIDS
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • OTHER STANDARD EQUIPMENT
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Emergency exit
    • Fire suppression ready
    • Fuel tank, 500 L (132.1 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Hydraulic, engine, and transmission oil coolers
    • Oil change system, high speed
    • Oil sampling valves
    • Steering, load sensing
    • Total hydraulic filtration system
    • Vandalism protection caplocks
    • Venturi stack
  • SPECIAL ARRANGEMENTS
    • Engine precleaners: – Turbine or dual stage
  • BLADES
    • Dozer Arrangement – Standard (No Blade)
    • Dozer Arrangement – Straight Blade
    • Dozer Arrangement (No Blade)
  • TECHNOLOGY PRODUCTS
    • Product Link: – cellular, satellite
  • WHEELS AND CLEANER BARS
    • Striker bars
    • Wheels and tips: – Wheel arrangement (6.25" plus tip) – Wheel arrangement (6.25" paddle tip) – Wheel arrangement (6.25" combination tips) – Wheels

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • FLUIDS
    • Antifreeze, –50° C (–58° F)
  • SPECIAL ARRANGEMENTS
    • Engine: – Sound suppression
  • POWERTRAIN
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Axles, no spin front, rear differential
    • Axles, no spin front, open differential rear
    • Axles, open differential front, no spin rear
  • MISCELLANEOUS
    • Film (ANSI) (Tier 4 Final/Stage V only)
    • CE/UKCA Certification (standard where regulations require it)
    • Plate – year of manufacture
  • OPERATOR ENVIRONMENT
    • Radio, AM/FM/Aux/USB/Bluetooth®
    • Cat Compact RTK Mapping (available throught SITECH only)
    • Cat Compact SBAS Mapping (available through SITECH only)
    • Lights, standard or LED
  • BLADES
    • Bulldozer Blades
  • WHEELS AND CLEANER BARS
    • Bar group – cleaner (cleaner fingers and striker bar)

Specs

Overview

Long Name:
816 Landfill Compactor
Name:
816
Brand:
Caterpillar
Status:
Current

Engine

Gross Power - SAE J1995:2014
284 hp / 212 kW
Net Power - SAE J1349:2011
249 hp / 186 kW
Net Power - ISO 9249:2007
249 hp / 186 kW
Engine Power - ISO 14396:2002
275 hp / 205 kW
Engine Model
Cat® C7.1
Emissions
Option 1 - U.S. EPA Tier 4 Final/EU Stage V/Korea Stage V and Japan 2014
Rated Speed
2200
Peak Torque ( 1,400 rpm )
902 lbf·ft / 1223 N·m
Torque Rise
52%
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, aftertreatment, and alternator.
Emissions
Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
2200
Net Power - SAE J1349:2011
249 hp / 186 kW
Net Power - ISO 9249:2007
249 hp / 186 kW
Gross Power - SAE J1995:2014
286 hp / 213 kW
Engine Power - ISO 14396:2002
275 hp / 205 kW
Peak Torque ( 1,400 rpm )
749 lbf·ft / 1016 N·m
Torque Rise
26%
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, muffler, and alternator.
Bore
4.1 in / 105 mm
Stroke
5.3 in / 135 mm
Displacement
427.8 in³ / 7.01 l
High Idle Speed
2270 r/min / 2270 r/min
Low Idle Speed
800 r/min / 800 r/min
Maximum Altitude - Without Derating
9842.5 ft / 3000 m

Operating Specifications

Operating Weight (Tier 4 Final/Stage V)
57345 lb / 26052 kg
Operating Weight (Tier 3/Stage IIIA equivalent)
56793 lb / 25761 kg

Transmission

Transmission Type
Cat Planetary Power Shift
Travel Speeds - Forward - First
3.4 mile/h / 6.7 km/h
Travel Speeds - Forward - Second
5.3 mile/h / 12 km/h
Travel Speeds - Reverse - First
3.7 mile/h / 7.7 km/h
Travel Speeds - Reverse - Second
5.5 mile/h / 12 km/h

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit
Pilot operated LS valve with EH
Lift/Tilt System
Variable displacement piston
Maximum Flow at 2,200 rpm
23.5 gal/min / 89 l/min
Relief Valve Setting - Lift/Tilt
3190 psi / 22000 kPa
Cylinders, Double Acting: Lift, Bore, Stroke
120 mm x 915 mm (4.7 in x 36.0)
Pilot System
Open center, fixed displacement gear
Pilot Relief Valve Setting
3046 psi / 21000 kPa

Hydraulic System - Steering

Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston – Variable Displacement
Maximum Flow at 2,200 rpm
38.8 gal/min / 147 l/min
Relief Valve Setting - Steering
4003 psi / 27600 kPa
Total Steering Angle
84°
Steering Cycle Times - High Idle
3 s / 3 s
Steering Cycle Times - Low Idle
8.2 s / 8.2 s

Service Refill Capacities

Fuel Tank
132.1 gal (US) / 500 l
Diesel Exhaust Fluid Tank
4.2 gal (US) / 16 l
Cooling Systems - Tier 4 Final/EU Stage V
21.4 gal (US) / 81 l
Cooling System - Tier 3/Stage IIIA Equivalent
19.3 gal (US) / 73 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission
14.8 gal (US) / 56 l
Differential - Final Drives - Front
11.4 gal (US) / 43 l
Differential - Final Drives - Rear
11.4 gal (US) / 43 l
Hydraulic System - Implement/Steering
46.2 gal (US) / 175 l
Hydraulic Tank Only
19.8 gal (US) / 75 l
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.4 kg (3.1 lb) of refrigerant which has a CO2 equivalent of 2.002 metric tonnes (2.206 tons).

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°

Braking System

Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A) / 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
111 dB(A) / 111 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
70 dB(A) / 70 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
109 dB(A) / 109 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A) / 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
112 dB(A) / 112 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
70 dB(A) / 70 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A) / 110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Straight Blade

Capacity
13.08 yd³ / 10 m³
Overall Width
12 ft / 3656 mm
Height
6.4 ft / 1961 mm
Height of Cutting Edge
3.2 ft / 990 mm
Digging Depth
1.2 ft / 362 mm
Ground Clearance
3.7 ft / 1140 mm
Turning Radius – Outside Corner of Blade
21.2 ft / 6473 mm
Turning Radius - Inside Corner of Blade
9.5 ft / 2910 mm
Weight
4548 lb / 2063 kg
Total Operating Weight
57345 lb / 26052 kg

Wheels

Combination Tips (Weight Group)
13554 lb / 6148 kg
Plus Tips - Weight (Group)
13982 lb / 6342 kg
Paddle Tips - Weight (Group)
13126 lb / 5954 kg
Outside Diameter
67.6 in / 1717 mm
Drum Diameter
55.1 in / 1400 mm
Drum Width
40 in / 1016 mm
Tips per Row
5
Tips per Wheel
20
Replaceable
Weld On
Width Over Drums
131.4 in / 3338 mm
Tip Height
6.25 in / 159 mm

Dimensions (Approximate)

Height - Top of Beacon
14.3 ft / 4368 mm
Height to Top of Air Conditioning Condenser
13.7 ft / 4161 mm
Height - Cab Roof
12.7 ft / 3878 mm
Height - Top of Exhaust Pipe
11.6 ft / 3547 mm
Height - Top of Hood
9.1 ft / 2770 mm
Height to Top of Rear Compactor Guard
8.2 ft / 2499 mm
Ground Clearance to Hitch
1.7 ft / 519 mm
Ground Clearance to Bottom of Bumper
2.7 ft / 818 mm
Centerline of Rear Axle to Bumper
6.5 ft / 1990 mm
Centerline of Rear Axle to Rear Compactor Guard
8.6 ft / 2614 mm
Hitch to Centerline of Front Axle
5.5 ft / 1675 mm
Wheel Base
11 ft / 3350 mm
Width over Front Striker Bars
9.8 ft / 3000 mm
Width over Rear Striker Bars
10 ft / 3036 mm
Width over Platform
10.3 ft / 3140 mm
Width over Drums
11 ft / 3338 mm
Overall Machine Length with Straight Blade
25.6 ft / 7806 mm
Ground Clearance to Transmission Guard
1.7 ft / 516 mm

SEE HOW 816 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Landfill Compactors
816
816 Landfill Compactor
Brand
Caterpillar
Status
Current
Gross Power - SAE J1995:2014
286 hp / 213 kW
Net Power - SAE J1349:2011
249 hp / 186 kW
Net Power - ISO 9249:2007
249 hp / 186 kW
Engine Power - ISO 14396:2002
275 hp / 205 kW
Engine Model
Cat® C7.1
Emissions
Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
2200
Torque Rise
26%
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Bore
4.1 in / 105 mm
Stroke
5.3 in / 135 mm
Displacement
427.8 in³ / 7.01 l
High Idle Speed
2270 r/min / 2270 r/min
Low Idle Speed
800 r/min / 800 r/min
Operating Weight (Tier 4 Final/Stage V)
57345 lb / 26052 kg
Operating Weight (Tier 3/Stage IIIA equivalent)
56793 lb / 25761 kg
Transmission Type
Cat Planetary Power Shift
Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston – Variable Displacement
Fuel Tank
132.1 gal (US) / 500 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission
14.8 gal (US) / 56 l
Differential - Final Drives - Front
11.4 gal (US) / 43 l
Differential - Final Drives - Rear
11.4 gal (US) / 43 l
Hydraulic Tank Only
19.8 gal (US) / 75 l
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°
Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
Ground Clearance
3.7 ft / 1140 mm
Combination Tips (Weight Group)
13554 lb / 6148 kg
Plus Tips - Weight (Group)
13982 lb / 6342 kg
Paddle Tips - Weight (Group)
13126 lb / 5954 kg
Outside Diameter
67.6 in / 1717 mm
Drum Diameter
55.1 in / 1400 mm
Drum Width
40 in / 1016 mm
Replaceable
Weld On
Width Over Drums
131.4 in / 3338 mm
Tip Height
6.25 in / 159 mm
Height to Top of Air Conditioning Condenser
13.7 ft / 4161 mm
Height - Cab Roof
12.7 ft / 3878 mm
Height - Top of Exhaust Pipe
11.6 ft / 3547 mm
Height - Top of Hood
9.1 ft / 2770 mm
Hitch to Centerline of Front Axle
5.5 ft / 1675 mm
Wheel Base
11 ft / 3350 mm
Selected Model
Landfill Compactors
836
836 Landfill Compactor
Brand
Caterpillar
Status
Current
Gross Power - SAE J1995:2014
562 hp / 419 kW
Net Power - SAE J1349:2011
496 hp / 370 kW
Net Power - ISO 9249:2007
502 hp / 374 kW
Engine Power - ISO 14396:2002
553 hp / 412 kW
Engine Model
C18
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Rated Speed
1900 rpm
Torque Rise
52%
Note
- All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specificiations. - Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. - Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Bore
5.71 in / 145 mm
Stroke
7.2 in / 183 mm
Displacement
1104.5 in³ / 18.1 l
High Idle Speed
2120 r/min / 2120 r/min
Low Idle Speed
750 r/min / 750 r/min
Operating Weight (Tier 4 Final/Stage V)
124063 lb / 56275 kg
Operating Weight (Tier 3/Stage IIIA equivalent)
123321 lb / 55939 kg
Transmission Type
Planetary - Powershift - ECPC
Steering System - Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System - Pump
Piston – Variable Displacement
Fuel Tank
209 gal (US) / 793 l
Engine Crankcase
16 gal (US) / 60 l
Transmission
21.9 gal (US) / 83 l
Differential - Final Drives - Front
49 gal (US) / 186 l
Differential - Final Drives - Rear
50 gal (US) / 190 l
Hydraulic Tank Only
27.2 gal (US) / 103 l
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Spring Applied, Hydraulic Released
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Ground Clearance
3.9 ft / 1198 mm
Combination Tips (Weight Group)
28250 lb / 12814 kg
Plus Tips - Weight (Group)
29784 lb / 13510 kg
Paddle Tips - Weight (Group)
272227 lb / 12350 kg
Outside Diameter
83.8 in / 2128 mm
Drum Diameter
69.7 in / 1770 mm
Drum Width
55.1 in / 1400 mm
Replaceable
Weld on
Width Over Drums
4280 mm / 168.5 in
Tip Height
179 mm / 7 in
Height to Top of Air Conditioning Condenser
15.2 ft / 4626 mm
Height - Cab Roof
14.1 ft / 4285 mm
Height - Top of Exhaust Pipe
15.1 ft / 4606 mm
Height - Top of Hood
11.3 ft / 3430 mm
Hitch to Centerline of Front Axle
7.5 ft / 2275 mm
Wheel Base
14.9 ft / 4550 mm
More Details
Landfill Compactors
826
826 Landfill Compactor
Brand
Caterpillar
Status
Current
Gross Power - SAE J1995:2014
435 hp / 324 kW
Net Power - SAE J1349:2011
405 hp / 302 kW
Net Power - ISO 9249:2007
405 hp / 302 kW
Engine Power - ISO 14396:2002
426 hp / 318 kW
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Bore
4.5 in / 114.3 mm
Stroke
22.7 in / 576 mm
Displacement
927.6 in³ / 15.2 l
High Idle Speed
2300 r/min / 2300 r/min
Low Idle Speed
800 r/min / 800 r/min
Operating Weight (Tier 4 Final/Stage V)
90207 lb / 40917 kg
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb / 40454 kg
Transmission Type
Planetary - Powershift - ECPC
Steering System - Circuit
Pilot operated, load sensing
Steering System - Pump
Piston - Variable Displacement
Fuel Tank
206.6 gal (US) / 782 l
Engine Crankcase
9 gal (US) / 34 l
Transmission
17.4 gal (US) / 66 l
Differential - Final Drives - Front
26.4 gal (US) / 100 l
Differential - Final Drives - Rear
29.1 gal (US) / 110 l
Hydraulic Tank Only
35.4 gal (US) / 134 l
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Ground Clearance
2.11 ft / 642 mm
Combination Tips (Weight Group)
21125 lb / 9582 kg
Plus Tips - Weight (Group)
22002 lb / 9980 kg
Paddle Tips - Weight (Group)
20540 lb / 9317 kg
Outside Diameter
77.6 in / 1971 mm
Drum Diameter
63.4 in / 1610 mm
Drum Width
47.2 in / 1200 mm
Replaceable
Weld On
Width Over Drums
3800 mm / 149.6 in
Tip Height
179 mm / 7 in
Height to Top of Air Conditioning Condenser
14.99 ft / 4568 mm
Height - Cab Roof
13.75 ft / 4193 mm
Height - Top of Exhaust Pipe
14.56 ft / 4439 mm
Height - Top of Hood
10.87 ft / 3312 mm
Hitch to Centerline of Front Axle
6.07 ft / 1850 mm
Wheel Base
12.14 ft / 3700 mm
More Details