930M Ag Handler

930M Ag Handler Small Wheel Loader

Studio Shot

DESCRIPTION

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Safety and Service Overview | Cat® 930M Ag Handler

Key Features and Benefits | Cat® 930M Ag Handler

Características y beneficios clave | Cat® 930M Ag Handler

930M Ag Handler Overview

930M Ag Handler at Work

Product Performance Customer Testimonials | Cat® 930M Ag Handler

Customer Support Testimonials | Cat® 930M Ag Handler

Customer Testimonials | Cat® 930M Ag Handler

Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips

Secondary Display Navigation | M Series Small Wheel Loader Operator Tips

Preventative Maintenance | M Series Small Wheel Loader Operator Tips

Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips

Creeper Control | M Series Small Wheel Loader Operator Tips

Rim Pull | M Series Small Wheel Loader Operator Tips

Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips

Throttle Lock | M Series Small Wheel Loader Operator Tips

Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips

Quick Steer | M Series Small Wheel Loader Operator Tips

Power Train Modes | M Series Small Wheel Loader Operator Tips

Cab Controls and Features | M Series Small Wheel Loader Operator Tips

Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips

Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips

Reversing Fan | M Series Small Wheel Loader Operator Tips

Customize Your Experience | M Series Small Wheel Loader Operator Tips

Differential Lock | M Series Small Wheel Loader Operator Tips

Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips

Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips

Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips

Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips

Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips

Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips

Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips

Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips

Efficiently Powerful

Experience hybrid-like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed of just 1,600 rpm in Standard Mode. Power when you need it with Caterpillar's exclusive Power‑by-Range technology that increases power in Range 4 for improved speed on grade. For your toughest and most demanding farm applications a new Performance Mode will allow you to boost the power and hydraulic speed in all Ranges to get the job done even quicker. Meets U.S. EPA Tier 4 Final emission standards with a Cat® C7.1 engine that is designed to manage itself so you can concentrate on your work.

Work Made Easy

Move more with Caterpillar's patented quick loading Performance Series buckets and High Lift optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to safely and confidently handle loads from bales to silage with precise control. Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer and drive without compromise. A 20% boost in hydraulic speeds on the Ag Handler helps you finish the day on time.

Enjoy All Day Comfort

Have a seat in the 930M Ag Handler and enjoy automatic temperature control, class leading sound levels, excellent all around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar's exclusive hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on the farm.

Customize Your Experience

Fine tune machine performance with adjustments at your fingertips through the soft touch buttons and optional secondary touch screen display. Quickly set auxiliary flow to optimize grapple or silage defacer speed, enable auto reversing fan to breathe clean in dusty environments, toggle over to fine mode for improved control when bale stacking, program linkage kick-out positions for easy feed wagon loading, adjust wheel torque to match underfoot conditions when cleaning corrals and customize ride control activation speed for a smooth loaded carry run. The 930M Ag Handler is ready for the challenge on your farm!

Sustainability

  • The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
  • Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
  • Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
  • Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
  • Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
  • Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
  • Variable Displacement Pumps match power to load as application requirements change.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • POWER TRAIN
    • Auto idle shut down feature
    • Cat C7.1 engine
      • Power modes (Standard and Performance)
      • Power by range (High Power in Range 4)
      • Turbocharged and aftercooled
      • Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Oil sampling ports
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      • Operator modes (Default, TC, Hystat™, and Ice)
      • Directional Shift Aggressiveness (fast, medium, slow)
      • Rimpull control, adjust wheel torque
      • Creeper control, adjust ground speed
    • Axle Duo-Cone™ seal guards
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
  • HYDRAULICS
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Load sensing hydraulics and steering
  • ELECTRICAL
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Halogen work and roading lights, LED rear tail lights
    • Product Link™ PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • OPERATOR ENVIRONMENT
    • Cab, pressurized
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Ground level cab door release
    • Suspension seat, fabric
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Mirror, single
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Camera, rear view
  • OTHER STANDARD EQUIPMENT
    • Cat optimized Z-bar linkage with parallel lift
    • Large-access enclosure doors with adjustable close/open force
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures

Optional Equipment

  • OPTIONAL EQUIPMENT
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      • Camera, rear view integrated into advanced display
      • Electrically adjustable external heated mirrors (2)
      • Secondary display to enable features and adjust parameters
      • LED interior lighting
      • Sunscreen, front and rear
      • Touchscreen secondary display
      • Ride control adjustable speed activation
      • Preventative maintenance reminders
      • Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
      • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Differential, limited slip, rear
    • Guarding packages
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Linkage, high lift
    • Payload Technology
      • Cat Production Measurement (CPM)
      • CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM)
    • Counterweight, additional options
    • Debris packages (low, medium, high)
    • Rear Object Detection

Specs

Overview

Long Name:
930M Ag Handler Small Wheel Loader
Name:
930M Ag Handler
Brand:
Caterpillar
Status:
Current

Engine

Maximum Gross Power
168 hp / 125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf / 815 N·m
Stroke - Performance Power Mode: Range 1-4
5.3 in / 135 mm
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min / 1800 r/min
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797 N·m / 588 ft·lbf
Displacement (Performance Power Mode: Speed Range 1-4)
428 in³ / 7.01 l
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Engine Model
Cat® C7.1
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Rated Gross Power - ISO 14396
168 hp / 125 kW
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 hp / 127 kW
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 hp / 125 kW
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Bore (Standard Power Mode: Range 1-4)
4.1 in / 105 mm
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 hp / 116 kW
Stroke (Standard Power Mode: Range 1-3**)
5.3 in / 135 mm
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 hp / 116 kW
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1600 r/min / 1600 r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 hp / 166 hp
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 hp / 122 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158 hp / 158 hp
Bore (Standard Power Mode: Range 1-3**)
4.1 in / 105 mm
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf / 796 N·m
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795 N·m / 586 ft·lbf
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776 N·m / 572 ft·lbf
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 hp / 122 kW
Displacement (Standard Power Mode: Range 1-3**)
428 in³ / 7.01 l
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160 hp / 119 kW
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162 hp / 162 hp
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573 ft·lbf / 777 N·m
Maximum Rated Gross Power - ISO 14396 (metric)
170 mhp / 170 mhp

Buckets

Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)

Weights

Operating Weight
31382 lb / 14235 kg

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II

Steering

Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Loader Hydraulic System

Relief Pressure - Tilt Cylinder
4351 psi / 30000 kPa

Steering

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns / 3.5 turns

Tires

Standard Size
20.5 R25, radial (L-3)

Service Refill Capacities

Transmission - Gear Box
2.2 gal (US) / 8.5 l

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1 s / 10.1 s
Maximum Flow - Implement Pump
50 gal/min / 190 l/min

Service Refill Capacities

Cooling System
7.9 gal (US) / 30 l

Loader Hydraulic System

Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min

Service Refill Capacities

Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l

Cab

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A) / 101 dB(A)

Power Train

Note
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).

Service Refill Capacities

Fuel Tank
51.5 gal (US) / 195 l

Steering

Maximum Flow - Steering Pump
34 gal/min / 130 l/min

Loader Hydraulic System

Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Transmission

Forward - Range 2
8 mile/h / 13 km/h
Forward - Range 1*
1-13 km/h (0.6-8 mph)

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5 s / 1.5 s
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.

Power Train

Rear Axle
Oscillating

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3 s / 9.3 s

Steering

Steering Cylinder, Double Acting - Bore Diameter
2.8 in / 70 mm
Steering Cylinder, Double Acting - Stroke
17.2 in / 438 mm

Power Train

Note (2)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Buckets

Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)

Operating Specifications

Full Turn Tip Load
19424 lb / 8811 kg

Transmission

Reverse - Range 4
25 mile/h / 40 km/h

Service Refill Capacities

Axles - Rear
6.6 gal (US) / 25 l

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Service Refill Capacities

Hydraulic System - Including Tank
43.6 gal (US) / 165 l

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7 s / 2.7 s

Cab

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A) / 68 dB(A)

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1 s / 5.1 s

Steering

Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Loader Hydraulic System

Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7 s / 2.7 s

Service Refill Capacities

Engine Crankcase
5.3 gal (US) / 20 l

Tires

Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi / 28000 kPa

Steering

Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa

Power Train

Front Axle
Fixed

Tires

Note (1)
Other tire choices are available. Contact your Cat dealer for details.

Transmission

Reverse - Range 2
8 mile/h / 13 km/h

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7 s / 1.7 s

Transmission

Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.
Forward - Range 3
17 mile/h / 27 km/h

Steering

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s / 2.8 s

Service Refill Capacities

Axles - Front
6.9 gal (US) / 26 l
Hydraulic Tank
23.8 gal (US) / 90 l

Steering

Steering Articulation Angle - Each Direction
40°

Axles

Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Loader Hydraulic System

Maximum Working Pressure - Implement Pump
4061 psi / 28000 kPa

Transmission

Forward - Range 4
25 mile/h / 40 km/h

Steering

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s / 2.4 s

Axles

Front
Fixed; Locking differential (standard)

Transmission

Reverse - Range 3
17 mile/h / 27 km/h

Power Train

Front Axle - Traction Aid*
Locking differential standard

Steering

Steering Cylinder, Double Acting - Rod Diameter
1.6 in / 40 mm

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi / 30000 kPa

Power Train

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
± 10.5 degrees

Transmission

Reverse - Range 1*
8 mile/h / 13 km/h

Cab

Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.

Loader Hydraulic System

Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Power Train

Brakes - Service
Inboard wet disc
Rear Axle - Traction Aid
Limited slip differential optional
Brakes - Parking
Spring applied hydraulically released

Tires

Other Choices Include
20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

Loader Hydraulic System

Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7 s / 5.7 s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3 in / 110 mm
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in / 555 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8 in / 70 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4 in / 60 mm
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1 in / 130 mm
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in / 728 mm

Power Train

Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
± 7 degrees

Dimensions with Bucket - Standard Lift

Height - Ground Clearance**
1.3 ft / 397 mm

Dimensions with Bucket - High Lift

Length - Rear Axle to Bumper
6.5 ft / 1993 mm

Dimensions with Bucket - Standard Lift

Rack Angle at Carry
43 ° / 43 °

Dimensions with Bucket - High Lift

Departure Angle
33 ° / 33 °
Height - Overall**
18.7 ft / 5698 mm

Dimensions with Bucket - Standard Lift

Departure Angle
33 ° / 33 °

Dimensions with Bucket - High Lift

Reach - Bucket at 45°*
4.4 ft / 1339 mm

Dimensions with Bucket - Standard Lift

Length - Wheel Base
9.8 ft / 3000 mm
Length - Rear Axle to Bumper
6.5 ft / 1993 mm
Turning Radius - Over Bucket
19.5 ft / 5952 mm
Carry Height - Bucket Pin
1.3 ft / 390 mm
Width - Over Tires
8.3 ft / 2540 mm

Dimensions with Bucket - High Lift

Dump Angle at Full Lift
48 ° / 48 °

Dimensions with Bucket - Standard Lift

Note (2)
**Vary with tire.

Dimensions with Bucket - High Lift

Width - Bucket
8.4 ft / 2550 mm

Dimensions with Bucket - Standard Lift

Dig Depth**
3.9 in / 100 mm
Turning Radius - Outside of Tires
17.7 ft / 5402 mm
Clearance - Level Bucket**
11.75 ft / 3580 mm
Clearance - Bucket at 45°*
9.1 ft / 2779 mm
Rack Angle at Full Lift
54 ° / 54 °
Height - Overall**
17.1 ft / 5205 mm

Dimensions with Bucket - High Lift

Length - Wheel Base
9.8 ft / 3000 mm

Dimensions with Bucket - Standard Lift

Width - Bucket
8.4 ft / 2550 mm
Height - Ground to Axle Center**
2.25 ft / 685 mm

Dimensions with Bucket - High Lift

Width - Tread Center
6.3 ft / 1930 mm

Dimensions with Bucket - Standard Lift

Height - Bucket Pin**
12.8 ft / 3907 mm

Dimensions with Bucket - High Lift

Length - Hitch to Front Axle
4.9 ft / 1500 mm

Dimensions with Bucket - Standard Lift

Operating Weight
31125 lb / 14118 kg

Dimensions with Bucket - High Lift

Height - Ground to Axle Center**
2.25 ft / 685 mm
Note (1)
*Vary with bucket.

Dimensions with Bucket - Standard Lift

Width - Tread Center
6.3 ft / 1930 mm
Turning Radius - Inside of Tires
9.4 ft / 2851 mm
Reach - Bucket at 45°*
3.6 ft / 1102 mm

Dimensions with Bucket - High Lift

Clearance - Bucket at 45°*
10.7 ft / 3272 mm
Height - Bucket Pin**
14.4 ft / 4400 mm

Dimensions with Bucket - Standard Lift

Length - Overall*
24.9 ft / 7593 mm

Dimensions with Bucket - High Lift

Height - Ground to Beacon**
12.2 ft / 3707 mm
Carry Height - Bucket Pin
1.9 ft / 582 mm
Clearance - Load over Height**
11.6 ft / 3550 mm
Turning Radius - Outside of Tires
17.7 ft / 5402 mm

Dimensions with Bucket - Standard Lift

Clearance - Load over Height**
10.9 ft / 3331 mm

Dimensions with Bucket - High Lift

Turning Radius - Over Bucket
20.6 ft / 6272 mm
Rack Angle at Full Lift
51 ° / 51 °
Rack Angle at Carry
47 ° / 47 °
Length - Overall*
27 ft / 8235 mm
Note (2)
**Vary with tire.
Height - Ground to Cab**
10.9 ft / 3340 mm

Dimensions with Bucket - Standard Lift

Length - Hitch to Front Axle
4.9 ft / 1500 mm

Dimensions with Bucket - High Lift

Turning Radius - Inside of Tires
9.4 ft / 2851 mm
Clearance - Level Bucket**
13.4 ft / 4073 mm
Width - Over Tires
8.3 ft / 2540 mm
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.

Dimensions with Bucket - Standard Lift

Height - Ground to Beacon**
12.2 ft / 3707 mm
Articulation Angle
40 ° / 40 °

Dimensions with Bucket - High Lift

Dig Depth**
5.3 in / 135 mm
Articulation Angle
40 ° / 40 °
Operating Weight
31441 lb / 14262 kg

Dimensions with Bucket - Standard Lift

Height - Ground to Cab**
10.9 ft / 3340 mm

Dimensions with Bucket - High Lift

Height - Ground Clearance**
1.3 ft / 397 mm

Dimensions with Bucket - Standard Lift

Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)
*Vary with bucket.
Dump Angle at Full Lift
48 ° / 48 °

Sustainability

Recyclability
94%

SEE HOW 930M Ag Handler COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Small Wheel Loaders
930M Ag Handler
Studio Shot
Brand
Caterpillar
Status
Current
Maximum Gross Power
168 hp / 125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf / 815 N·m
Engine Model
Cat® C7.1
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)
*Vary with bucket.
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
Operating Weight
31441 lb / 14262 kg
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Relief Pressure - Tilt Cylinder
4351 psi / 30000 kPa
Transmission - Gear Box
2.2 gal (US) / 8.5 l
Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Cooling System
7.9 gal (US) / 30 l
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.
Fuel Tank
51.5 gal (US) / 195 l
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Hydraulic System - Including Tank
43.6 gal (US) / 165 l
Engine Crankcase
5.3 gal (US) / 20 l
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi / 28000 kPa
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Hydraulic Tank
23.8 gal (US) / 90 l
Maximum Working Pressure - Implement Pump
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi / 30000 kPa
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Recyclability
94%
Selected Model
Small Wheel Loaders
930M
Studio Shot
Brand
Caterpillar
Status
Current
Maximum Gross Power
168 hp / 125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf / 815 N·m
Engine Model
Cat C7.1**
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Operating Weight
31382 lb / 14235 kg
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Relief Pressure - Tilt Cylinder
4061 psi / 28000 kPa
Transmission - Gear Box
2.2 gal (US) / 8.5 l
Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Cooling System
7.9 gal (US) / 30 l
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Fuel Tank
51.5 gal (US) / 195 l
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Hydraulic System - Including Tank
43.6 gal (US) / 165 l
Engine Crankcase
5.3 gal (US) / 20 l
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi / 26000 kPa
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Hydraulic Tank
23.8 gal (US) / 90 l
Maximum Working Pressure - Implement Pump
3771 psi / 26000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi / 28000 kPa
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Recyclability
94%
More Details
Small Wheel Loaders
930M Aggregate Handler
Studio Shot
Brand
Caterpillar
Status
Current
Maximum Gross Power
168 hp / 125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf / 815 N·m
Engine Model
Cat® C7.1
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
Bucket Capacities
2.5-5.0 m3 (3.3-6.5 yd3)
Operating Weight
31848 lb / 14446 kg
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Relief Pressure - Tilt Cylinder
4061 psi / 28000 kPa
Transmission - Gear Box
2.2 gal (US) / 8.5 l
Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Cooling System
7.9 gal (US) / 30 l
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Fuel Tank
51.5 Gal / 195 l
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Hydraulic System - Including Tank
43.6 gal (US) / 165 l
Engine Crankcase
5.3 gal (US) / 20 l
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi / 26000 kPa
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Hydraulic Tank
23.8 gal (US) / 90 l
Maximum Working Pressure - Implement Pump
3771 psi / 26000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi / 28000 kPa
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Recyclability
94%
More Details