938

938 Small Wheel Loader

Studio Shot

DESCRIPTION

The 938 Small Wheel Loader sets the standard for productivity, fuel efficiency, operator comfort and low operating costs. Experience the industry benchmark.Cat® wheel loaders set the standard for productivity, fuel efficiency, operator comfort and low operating costs. The Cat 938 Small Wheel Loader features a high torque C7.1 engine that works in conjunction with an intelligent hydrostatic power train to deliver exceptional fuel efficiency. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, designed to manage itself so you can concentrate on your work. Extended service intervals to 1000 hours reduce fluid and filter use by up to 45% (compared to previous M Series models) while keeping operating cost low.

Cat® 926, 930, 938 Next Generation Small Wheel Loaders at Work

Overview | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Lower Operating Costs | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Technology Made Easy | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Safety Enhancements | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Features and Benefits | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Auto Engine | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Auto Wheel Torque | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Dedicated Pumps | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Programmable Kickouts | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Cat® Payload | Cat 926, 930, 938 Next Generation Small Wheel Loaders

Single Pedal Mode | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Attachment Profiles | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Couplers | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Autolube | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Upgrades and Accessories | Cat® 926, 930, 938 Next Generation Small Wheel Loaders

Auto Differential Lock | Cat® 938 Next Generation Small Wheel Loader Exclusive

Enjoy All Day Comfort

  • Have a seat in the new Cat small wheel loader and enjoy automatic temperature control, class leading sound levels, enhanced all-around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on your jobsite.
  • An upgrade to multi-view camera and rear object detection gives you an extra eye on the jobsite while the new optional force feedback joystick steering keeps you feeling confident on those long shifts. The operator not present function helps to isolate the machine if you leave the environment; while seat belt notifications give you a gentle reminder to buckle up.

Efficiently Powerful

  • Experience the difference with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed working in combination with a new auto engine RPM mode. This provides efficiency as standard with a boost in power when you need it. Optimize traction and minimize wheel slip with a new Auto Wheel Torque system tuned to provide peak performance while maximizing tire life and keeping operating costs low. Track your production and accurately hit your load targets with Cat Payload. 250 hours of Cat Payload demonstration will be included as standard with an optional subscription for extended use.

Work Made Easy

  • Move more with the Caterpillar patented quick loading performance series buckets and optimized Z-bar linkage with enhanced forward visibility that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to confidently handle loads with precise control.
  • Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer, and drive without compromise. Upgrade to autolube and tire pressure monitoring to make service easy and get to work quicker. Light the way with auto roading lights that come on at night fall.

Customize Your Experience

  • Meet your application requirements and individual preferences with Caterpillar industry first Hystat™ Operator Modes featuring four unique power train settings. Select classic torque converter for smooth rollout, conventional hystat for aggressive engine braking, an ice mode that maximizes your control on slippery underfoot, and an all new single pedal mode for simplified use.
  • Fine tune machine performance with adjustments at your fingertips through programmable joysticks, soft touch buttons, and a new jog dial that works in combination with a standard touch screen display. Quickly recall attachment profiles that maintain key settings for versatility on the jobsite and optimal efficiency.

Upgrades and Services

  • Enjoy a full range of upgrades and accessories to configure your small wheel loader for a broader range of applications.
  • Utilize readily available services and maintenance parts, including a range of self-service options (SSO) and dealer installed kits.

Purpose Built: Handlers Arrangements - Aggregate Handler

  • Increased Payload: Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.
  • Long Life Sand and Gravel Buckets: Performance series buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. Buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.
  • Protect your Power Train: Increase your fording depth with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond cleanout without contamination.

Purpose Built: Handlers Arrangements - Waste Handler

  • Guard Your Investment: Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. Machine guarding is purpose built to protect the machine’s major components.
  • Breathe Clean: Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breathe clean with a powered pre-cleaner for the operator environment.
  • Maximize Tire Life: Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Standard auto wheel torque and auto differential lock are ideal for waste handling applications.

Sustainability

  • The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
  • Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
  • Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
  • Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
  • Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
  • Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
  • Variable Displacement Pumps match power to load as application requirements change.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • NOTE: Not all features are available in all regions.
  • OPERATOR ENVIRONMENT
    • 75 mm (3 in) retractable seatbelt
    • Automatic temperature control
    • Cab, enclosed ROPS/FOPS pressurized and sound suppressed
    • Push to Start
    • 8 Inch Touch Screen
    • Jog Dial with screen control
    • Programmable Joystick
    • Cup holders
    • External mirrors with lower parabolic
    • Ground level cab door release
    • Hydraulic control lockout
    • Interior cab lighting, door
    • Lunch box storage
    • Operator Not Present system
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat mounted electronic implement controls, adjustable
    • Sliding glass on side window
    • Column mounted multi function control lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
    • Wet arm wiper washer, rear
    • Mounting Provision
    • Digital hour meter, odometer and tachometer
    • Digital ground speedometer and direction indicator
    • Engine coolant temperature gauge
    • Fuel and diesel exhaust fluid levels
    • Hydraulic oil temperature gauge
  • POWER TRAIN
    • Cat C7.1 engine
    • Auto idle shut down feature
    • Auto Engine RPM
    • Auto Differential Lock
    • Tier 4 Final/EU Stage V compliant
    • Turbocharged and aftercooled
    • Filtered crankcase breather
    • Diesel particulate filter
    • Selective catalyst reduction
    • Dry type air cleaner
    • Coolant protection to –34 °C (–29 °F)
    • Fuel priming pump, automatic
    • Fuel water separator
    • Differential lock in front axle
    • Axle seal guards
    • Enclosed wet disc full hydraulic brakes
    • Parking brake, electric
    • Lubed for life driveshafts
    • Hydrostatic transmission with electronic control
    • Operator modes (TC, Hystat,
    • Single Pedal and Ice)
    • Directional shift aggressiveness (fast, medium, slow)
    • Auto Wheel Torque control, adjust wheel torque
    • Creeper control, adjust ground speed
    • Single plane cooling package, wide 6 fins per inch density
    • Hydraulically driven demand cooling fan
    • Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission
  • HYDRAULICS
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Hydraulic diagnostic connectors and
    • S·O·S ports
    • Hydraulic sight gauge, visible
    • Load sensing hydraulics and steering
    • Seat mounted hydraulic joystick controls
    • Cat Payload 250 hours of Demo
  • ELECTRICAL
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24-volt system, disconnect switch
    • Back up alarm
    • Emergency shutdown switch
    • LED rear stop and turn lights
    • Heavy duty gear reduction starter
    • Product Link™ Elite
    • Remote jump start post
    • Resettable main and critical function breakers
    • Roading lights front and rear
  • OTHER
    • Large-access enclosure doors with adjustable close/open force
    • Parallel lift loader linkage
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Lockable compartments
    • 1000-hour Service Intervals (after initial 500)

Optional Equipment

  • NOTE: Not all features are available in all regions.
  • OPERATOR ENVIRONMENT
    • Joystick steering – 25 mph (40 kph) capable
    • Radio packages
    • Telescoping Steering Column
    • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
    • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Rear Object Detection
    • Multi View Camera
    • Front View Camera, roof mounted
    • Heated external Mirrors (2)
    • Electrically adjustable and heated external mirrors (2)
    • Internal Mirrors (2)
    • Sunscreen, front and rear
    • Windshield Washing Platform
    • Powered precleaned for cab air
    • Cab guarding
  • POWER TRAIN
    • Differential, limited slip, rear
    • Powertrain Guarding
    • Tire Pressure Monitoring (TPM)
    • Range of Tire Options
    • Fenders (extended cover and full coverage)
  • HYDRAULICS
    • Auxiliary flow, third and fourth function
    • Connect Under Pressure Disconnects
    • Ride Control System, adjustable via display
    • Autolube, integrated in display
    • Biodegradable Oil
    • Debris packages (low, medium, high)
  • ELECTRICAL
    • Cold start package
    • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Beacon light, strobe
    • Light Guarding
  • OTHER OPTIONAL EQUIPMENT
    • Linkage, high lift
    • Coupler, (Fusion and ISO 23727:2009)
    • Heavy Counterweight
    • Aggregate Counterweight
    • Cat Payload Printer
    • Cylinder Guarding
    • Range of Work Tool Attachments

Specs

Overview

Long Name:
938 Small Wheel Loader
Name:
938
Brand:
Cat
Status:
Current

Engine

Rated Gross Power - SAE J1995
191 hp / 143 kW
Engine Model
Cat C7.1*
Performance Mode
Automatic
Rated Gross Power - Rated Engine Speed
1800 r/min / 1800 r/min
Rated Gross Power - SAE J1995 (DIN)
194 mhp / 194 mhp
Rated Engine Power - ISO 14396
188 hp / 140 kW
Rated Engine Power - ISO 14396 (DIN)
191 mhp / 191 mhp
Rated Net Power - SAE J1349 at Minimum Fan Speed
185 hp / 138 kW
Rated Net Power - ISO 9249 at Minimum Fan Speed
185 hp / 138 kW
Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed
188 mhp / 188 mhp
Maximum Gross Torque - Engine Speed
1400 r/min / 1400 r/min
Maximum Gross Torque - SAE J1995
673 ft·lbf / 912 N·m
Maximum Gross Torque - ISO 14396
664 ft·lbf / 900 N·m
Maximum Net Torque - SAE J1349
656 ft·lbf / 889 N·m
Maximum Net Torque - ISO 9249
658 ft·lbf / 892 N·m
Displacement
427 in³ / 7.01 B
Bore
4 in / 105 mm
Stroke
5 in / 135 mm
Note
*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Weights

Operating Weight
35528 lb / 16115 kg
Operating Weight - High Lift
36210 lb / 16425 kg

Buckets

Bucket Capacities
1.9-5.0 m3 (2.5-6.5 yd3)

Steering

Steering Cylinder - Bore Diameter
3.1 in / 80 mm
Steering Cylinder - Rod Diameter
2 in / 50 mm
Steering Cylinder - Stroke
15.7 in / 399 mm
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited
3.1 s / 3.1 s
Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed
2.3 s / 2.3 s

Loader Hydraulic System

Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Maximum Working Pressure - Implement Pump
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder
4351 psi / 30000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi / 30000 kPa
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.7 in / 120 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.6 in / 65 mm
Lift Cylinder: Standard Lift Linkage - Stroke
31.1 in / 789 mm
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.9 in / 150 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
3.5 in / 90 mm
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in / 555 mm
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.5 s / 5.5 s
Hydraulic Cycle Time - Dump (at Maximum Lift Height)
1.5 s / 1.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s / 2.7 s
Hydraulic Cycle Time - Total Cycle Time
9.7 s / 9.7 s
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Service Refill Capacities

Fuel Tank
51.5 gal (US) / 195 B
Cooling System
7.9 gal (US) / 30 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission - Gear Box
2.2 gal (US) / 8.5 l
Front Axles
9.2 gal (US) / 35 l
Rear Axles
9.2 gal (US) / 35 l
Hydraulic System - Including Tank
4.93 gal (US) / 170 l
Hydraulic Tank
23.8 gal (US) / 90 B
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Note
DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.

Transmission

Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h / 13 km/h
Forward and Reverse - Range 3
17 mile/h / 27 km/h
Forward and Reverse - Range 4
25 mile/h / 40 km/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Tires

Standard Size
20.5 R25, radial (L-3)
Other Choices Include
20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).

Sound

Operator Sound Pressure (ISO 6396:2008)
68 dB(A) / 68 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)
101 dB(A) / 101 dB(A)
Note (1)
European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.

Sustainability

Recyclability
96%

Dimensions with Bucket - Standard Lift

Height - Ground to Cab**
10.92 ft / 3340 mm
Height - Ground to Beacon**
12.17 ft / 3707 mm
Height - Ground to Axle Center**
2.25 ft / 685 mm
Height - Ground Clearance**
1.25 ft / 386 mm
Length - Overall*
25.08 ft / 7656 mm
Length - Rear Axle to Bumper
6.42 ft / 1968 mm
Length - Hitch to Front Axle
5 ft / 1525 mm
Length - Wheel Base
10 ft / 3050 mm
Clearance - Bucket at 45°*
9.3 ft / 2834 mm
Clearance - Load over Height**
11 ft / 3354 mm
Clearance - Level Bucket**
11.9 ft / 3641 mm
Height - Bucket Pin**
13 ft / 3969 mm
Height - Overall**
17.33 ft / 5273 mm
Reach - Bucket at 45°*
3.75 ft / 1146 mm
Carry Height - Bucket Pin
1.33 ft / 394 mm
Dig Depth**
4 in / 101 mm
Width - Bucket
9 ft / 2750 mm
Width - Tread Center
6.83 ft / 2083 mm
Turning Radius - Over Bucket
20.08 ft / 6120 mm
Width - Over Tires
8.83 ft / 2693 mm
Turning Radius - Outside of Tires
18.16 ft / 5546 mm
Turning Radius - Inside of Tires
9.33 ft / 2843 mm
Rack Angle at Full Lift
54 ° / 54 °
Dump Angle at Full Lift
49 ° / 49 °
Rack Angle at Carry
43 ° / 43 °
Departure Angle
33 ° / 33 °
Articulation Angle
40 ° / 40 °
Operating Weight
35528 lb / 16115 kg
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 2.5 m³ (3.2 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.

Dimensions with Bucket - High Lift

Height - Ground to Cab**
10.92 ft / 3340 mm
Height - Ground to Beacon**
12.17 ft / 3707 mm
Height - Ground to Axle Center**
2.25 ft / 685 mm
Height - Ground Clearance**
1.25 ft / 386 mm
Length - Overall*
27.58 ft / 8397 mm
Length - Rear Axle to Bumper
6.42 ft / 1968 mm
Length - Hitch to Front Axle
5 ft / 1525 mm
Length - Wheel Base
10 ft / 3050 mm
Clearance - Bucket at 45°*
11.16 ft / 3415 mm
Clearance - Load over Height**
11.66 ft / 3561 mm
Clearance - Level Bucket**
13.83 ft / 4222 mm
Height - Bucket Pin**
14.92 ft / 4550 mm
Height - Overall**
19.2 ft / 5853 mm
Reach - Bucket at 45°*
4.66 ft / 1413 mm
Carry Height - Bucket Pin
2 ft / 612 mm
Dig Depth**
5.25 in / 135 mm
Width - Bucket
9 ft / 2750 mm
Width - Tread Center
6.83 ft / 2083 mm
Turning Radius - Over Bucket
21.25 ft / 6483 mm
Width - Over Tires
8.83 ft / 2693 mm
Turning Radius - Outside of Tires
18.16 ft / 5546 mm
Turning Radius - Inside of Tires
9.33 ft / 2843 mm
Rack Angle at Full Lift
53 ° / 53 °
Dump Angle at Full Lift
47 ° / 47 °
Rack Angle at Carry
48 ° / 48 °
Departure Angle
33 ° / 33 °
Articulation Angle
40 ° / 40 °
Operating Weight
36210 lb / 16425 kg
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 2.5 m³ (3.2 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.

SEE HOW 938 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Small Wheel Loaders
938
Studio Shot
Brand
Cat
Status
Current
Engine Model
Cat C7.1*
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with 2.5 m³ (3.2 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
Operating Weight
36210 lb / 16425 kg
Bucket Capacities
1.9-5.0 m3 (2.5-6.5 yd3)
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Maximum Working Pressure - Implement Pump
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder
4351 psi / 30000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi / 30000 kPa
Fuel Tank
51.5 gal (US) / 195 B
Cooling System
7.9 gal (US) / 30 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission - Gear Box
2.2 gal (US) / 8.5 l
Hydraulic System - Including Tank
4.93 gal (US) / 170 l
Hydraulic Tank
23.8 gal (US) / 90 B
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h / 13 km/h
Forward and Reverse - Range 3
17 mile/h / 27 km/h
Forward and Reverse - Range 4
25 mile/h / 40 km/h
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).
Recyclability
96%
Selected Model
Small Wheel Loaders
930M Waste Handler
Studio Shot
Brand
Caterpillar
Status
Current
Engine Model
Cat® C7.1
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)
Offset rims available to meet European roading requirements.
Note (3)
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Operating Weight
37713 lb / 17107 kg
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Maximum Working Pressure - Implement Pump
3771 psi / 26000 kPa
Relief Pressure - Tilt Cylinder
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi / 28000 kPa
Fuel Tank
51.5 gal (US) / 195 l
Cooling System
7.9 gal (US) / 30 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission - Gear Box
2.2 gal (US) / 8.5 l
Hydraulic System - Including Tank
43.6 gal (US) / 165 l
Hydraulic Tank
23.8 gal (US) / 90 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h / 13 km/h
Forward and Reverse - Range 3
17 mile/h / 27 km/h
Forward and Reverse - Range 4
25 mile/h / 40 km/h
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Air Conditioning
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Recyclability
94%
More Details
Small Wheel Loaders
938M
Studio Shot
Brand
Caterpillar
Status
Current
Engine Model
Cat C7.1 ACERT**
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:<br>– Standard cab: 68 ±3 dB(A)<br>– Deluxe cab: 66 ±2 dB(A)
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Operating Weight
35778 lb / 16229 kg
Bucket Capacities
2.5-5.0 m3 (3.2-6.5 yd3)
Maximum Flow - Steering Pump
34 gal/min / 130 l/min
Maximum Working Pressure - Steering Pump
3500 psi / 24130 kPa
Maximum Flow - Implement Pump
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min / 190 l/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min / 160 l/min
Maximum Working Pressure - Implement Pump
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder
4351 psi / 30000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi / 30000 kPa
Fuel Tank
51.5 gal (US) / 195 l
Cooling System
7.9 gal (US) / 32 l
Engine Crankcase
5.3 gal (US) / 20 l
Transmission - Gear Box
2.9 gal (US) / 11 l
Hydraulic System - Including Tank
44.9 gal (US) / 170 l
Hydraulic Tank
23.8 gal (US) / 90 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h / 13 km/h
Forward and Reverse - Range 3
17 mile/h / 27 km/h
Forward and Reverse - Range 4
25 mile/h / 40 km/h
ROPS
ISO 3471:2008
FOPS
ISO 3449:2008 Level II
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Recyclability
94%
More Details