C13 ACERT™ (Dry Manifold)
C13 ACERT™ Dry Manifold Petroleum Engine
DESCRIPTION
Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C13 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C13 ACERT™ Industrial Diesel Engine. Ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards.Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
Testing
Every engine is full-load tested to ensure proper engine performance.
Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Air Inlet System
- Turbocharger, mid-mounted
- Air inlet elbow 90°, 104.5 mm (4.11" OD) hose connection
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring system — speed, temperature, pressure
- J1939 Broadcast — diagnostic and engine status
- Cooling System
- Thermostats and housing
- Jacket water pump — gear-driven
- Front water pump inlet
- Exhaust System
- Exhaust manifold — dry
- Front turbo exhaust
- Flywheels and Flywheel Housings
- See Mandatory Options
- Fuel System
- Electronic unit injector
- Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
- Fuel transfer pump — front
- Fuel priming pump — LH mid-mount
- Fuel fitting — fuel return connection: straight No. 8, 5/8-18
- Lube System
- Crankcase breather
- Oil cooler
- Oil filter — RH
- Oil pan — front sump, 40 L capacity
- Oil filler — LH front
- Oil dipstick — LH front
- Oil pump
- Oil valve sampling — RH rear engine side
- Power Take-Offs
- Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
- Hydraulic pump drive — SAE A, 11-tooth
- 1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity)
- General
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit (connectors, pins, sockets)
- Literature
- Mandatory Options
- Flywheel housing or rear PTO
- Throttle position sensor
- Primary filter/water separator
Optional Equipment
- Air Compressor
- Air compressors
- Air chambers
- Air compressor governors
- Air Inlet System
- Air cleaners
- Precleaners
- Air lines
- Air inlet gasket
- Belt-Driven Accessories
- Refrigerant compressor and mounting
- Charging System
- Charging alternators
- Alternator mountings
- Alternator guard
- Alternator accessories
- Control System
- Connection
- Cooling System
- Radiator — installed
- Fan drive f/u/w Caterpillar installed radiator
- Fan drive pulleys f/u/w customer-supplied radiators
- Coolant conditioner
- Water lines — pump inlet
- Fan drive mountings
- Fan height instructions
- Fan adapters for suction fans and blower fans
- Suction fans and blower fans
- Coolant level sensor
- Aftercooler lines
- Exhaust System
- Muffler
- Flexible fitting
- Elbows, flange, pipe, clamp
- Straight exhaust adapter
- Fuel System
- Fuel lines for fuel filter
- Fuel cooler
- Fuel fitting — fuel return connection
- Flexible fuel lines
- Instrumentation
- Gauges and instrument panels
- Voltmeters
- Gauge mounting
- Ammeter
- Lube System
- Oil pan
- Oil pan drain
- Oil level gauges
- Oil filter — bypass and remote
- Lubricating oil
- Oil filler
- Fumes disposal
- Mounting System
- Front and rear engine supports
- Structural steel base
- Power Take-Offs
- Crankshaft pulleys
- Crankshaft pulley — stack-on
- Output flange
- Flywheel stub shaft
- Front stub shaft
- Hydraulic pump drive
- Hydraulic pumps — front and rear
- Enclosed clutch
- Clutch support
- Protection System
- Air shutoff
- Air shutoff switch
- Starting System
- Starting System
- Starting aids
- Battery sets — 24 Volt, dry
- Battery cable
- Battery rack
- Transmission Arrangement
- Transmission cooler
Specs
Overview
General Specifications
Emissions
Dimensions
Capacity for Liquids
SEE HOW C13 ACERT™ (Dry Manifold) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 520 BHP / 387 bkW
- Displacement
- 760 in³ / 12.5 l
- Minimum Rating
- 385 BHP / 287 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1
- Flywheel Teeth
- 113
- Stroke
- 6.2 in / 157 mm
- Bore
- 5.1 in / 130 mm
- Emissions
- EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
- Length
- 47.3 in / 1201 mm
- Width
- 39.9 in / 1013 mm
- Height
- 46.7 in / 1186 mm
- Weight
- 1976 lb / 896 kg
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 450 BHP / 336 bkW
- Displacement
- 681 in³ / 11.15 l
- Minimum Rating
- 325 BHP / 242 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1 or SAE 2
- Flywheel Teeth
- 113 (SAE 1), 138 (SAE 2)
- Stroke
- 5.51 in / 140 mm
- Bore
- 5.12 in / 130 mm
- Emissions
- EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA, IMO II
- Length
- 47.3 in / 1201 mm
- Width
- 41.6 in / 1057 mm
- Height
- 46.3 in / 1176 mm
- Weight
- 1967 lb / 892.22 kg
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 520 BHP / 388 bkW
- Displacement
- 762.8 in³ / 12.5 l
- Minimum Rating
- 385 BHP / 287 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1
- Flywheel Teeth
- 113
- Stroke
- 6.18 in / 157 mm
- Bore
- 5.12 in / 130 mm
- Emissions
- EPA Tier 4 Final and EU Stage IV
- Length
- 47.3 in / 1201 mm
- Width
- 39.9 in / 1013 mm
- Height
- 44.7 in / 1186 mm
- Weight
- 1976 lb / 896 kg