C2.8
Cat?� C2.8 Industrial Diesel Engine
DESCRIPTION
The Cat?� C2.8 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 55 bkW (74 bhp) @ 2500 rpm. The C2.8 is designed to meet the needs of many industries and applications, including agricultural tractors, aerial lifts, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven technologies and extensive field validation assure reliability and durability in tough nonroad applications.
High Performance
Leading edge fuel systems and turbocharging provide high torque even at lower engine speeds.
Fuel Efficiency
Fuel consumption optimized to match the measured operating cycles of a wide range of equipment types.
Broad Application Range
Industry-leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.
Low Cost Maintenance
Worldwide service delivers ease of maintenance and simplifies the servicing routine. Capable of optimal oil change intervals of 500 hours. The S•O•S℠ program is available from your Cat dealer to determine oil change intervals and provide optimal performance.
Quality
Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.
World-class Product Support Offered Through Global Cat Dealer Network
- Scheduled maintenance, including SOS℠ sample
- Customer Support Agreements (CSA)
- Caterpillar Extended Service Coverage (ESC)
- Superior dealer service network
- Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
- Standard Equipment
- Specs
Standard Equipment
- Air Inlet System
- Induction manifolds
- Exhaust manifolds
- Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
- Flywheels and Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
- General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
Specs
Overview
Long Name:
Cat?� C2.8 Industrial Diesel Engine
Name:
C2.8
Brand:
Caterpillar
Status:
Current
Power Rating
Maximum Power
74 hp / 55 kW
Maximum Torque
221 lb-ft @ 1600 rpm / 300 Nm @ 1600 rpm
Rated Speed
2200-2400 rpm
Minimum Power
67 hp / 50 kW
Emission Standards
Emissions
UN ECE R96 Stage IIIA, Brazil MAR-1
General
Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
3.5 in / 90 mm
Stroke
4.3 in / 110 mm
Displacement
171 in³ / 2.8 l
Compression Ratio
17.0:1
Aspiration
Turbocharged (T) and Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Engine Dimensions - Approximate
Length
24.9 in / 633 mm
Width
21.2 in / 538 mm
Height
30.9 in / 786 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
705 lb / 320 kg
SEE HOW C2.8 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Industrial Diesel Engines
C2.8
- Brand
- Caterpillar
- Status
- Current
- Maximum Power
- 74 hp / 55 kW
- Maximum Torque
- 221 lb-ft @ 1600 rpm / 300 Nm @ 1600 rpm
- Rated Speed
- 2200-2400 rpm
- Minimum Power
- 67 hp / 50 kW
- Emissions
- UN ECE R96 Stage IIIA, Brazil MAR-1
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 3.5 in / 90 mm
- Stroke
- 4.3 in / 110 mm
- Displacement
- 171 in³ / 2.8 l
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged (T) and Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Length
- 24.9 in / 633 mm
- Width
- 21.2 in / 538 mm
- Height
- 30.9 in / 786 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 705 lb / 320 kg
Selected Model
Industrial Diesel Engines
C2.2 China NR4
- Brand
- Caterpillar
- Status
- Current
- Maximum Power
- 74 hp / 55 kW
- Maximum Torque
- 199 lb-ft @ 1600 rpm / 270 Nm @ 1600 rpm
- Rated Speed
- 2800 rpm
- Minimum Power
- 60 hp / 45 kW
- Emissions
- China Nonroad Stage IV
- Engine Configuration
- In-Line 4, 4-Stroke-Cycle Diesel
- Bore
- 3.3 in / 84 mm
- Stroke
- 3.9 in / 100 mm
- Displacement
- 135 in³ / 2.2 l
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged (T) or Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF
- Length
- 16.1 in / 408 mm
- Width
- 20.8 in / 529 mm
- Height
- 30.2 in / 766 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 509 lb / 231 kg
Industrial Diesel Engines
C2.8
- Brand
- Caterpillar
- Status
- Current
- Maximum Power
- 74 hp / 55 kW
- Maximum Torque
- 280 lb-ft @ 1360 rpm / 380 Nm @ 1360 rpm
- Rated Speed
- 2200 - 2400 rpm
- Minimum Power
- 67 hp / 50 kW
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
- Engine Configuration
- In-Line 4
- Bore
- 3.5 in / 90 mm
- Stroke
- 4.3 in / 110 mm
- Displacement
- 171 in³ / 2.8 l
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged (T) and Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF
- Length
- 24.9 in / 633 mm
- Width
- 22.4 in / 543 mm
- Height
- 30.9 in / 786 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 750 lb / 340 kg