C27 ACERT™ (Dry Manifold)
C27 ACERT™ Dry Manifold Engine
DESCRIPTION
Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C27 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C27 ACERT engines, with ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 2 equivalent emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Transmissions
Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenance
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
Testing
Every engine is full-load tested to ensure proper engine performance.
Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Air Inlet System
- Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
- Cooling System
- Thermostats and housing — outlet LH vertical orientation
- Jacket water pump — gear-driven, centrifugal RH
- Exhaust System
- Exhaust manifold — dry, heat shields
- Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
- Water-cooled center sections
- Flywheels and Flywheel Housings
- SAE No. 0 or SAE No. 1
- SAE standard rotation
- Fuel System
- MEUI system
- Fuel filter, RH ( 2 micron high performance)
- Fuel transfer pump
- Fuel priming pump (optional electric priming pump)
- Lube System
- Crankcase breather — rear mounted
- Oil cooler — RH
- Side turbo — oil filler in RH front gear case
- Rear turbo — oil filler in RH valve cover
- Oil level gauge — RH
- Oil filter — RH
- Oil pan rear sump
- Mounting System
- Front support — narrow
- Power Take-Offs
- Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
- General
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
Optional Equipment
- Air Inlet System
- Air lines
- Air cleaners
- Precleaners
- Charging System
- Battery chargers
- Charging alternators
- Alternator mountings
- Circuit Breakers
- Circuit breaker mounting
- Cooling System
- Blower fans
- Suction fans
- Radiators
- Exhaust System
- Muffler
- Fuel Systems
- Electric fuel priming pump
- Instrumentation
- Gauges and instrument panels
- Lube System
- Lubricating oil
- Oil pan
- Oil filter
- Mounting System
- Engine supports
- Power Take-Offs
- Hydraulic pump drives
- Pulley
- Auxiliary drive
- Starting System
- Electric starting motor
- Battery sets - 24V
- Battery cable
- Battery rack
- Starting aids
- Packaging
- Overseas preservation
- Storage preservation
- Export packaging
Specs
Overview
General Specifications
Emissions
Dimensions
Capacity for Liquids
SEE HOW C27 ACERT™ (Dry Manifold) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 1050 BHP / 782 bkW
- Displacement
- 1658 in³ / 27.2 l
- Minimum Rating
- 800 BHP / 596 bkW
- Governor and Protection
- ADEM A3
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136 (SAE No. 0), 113 (SAE No. 1)
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 6 in / 152.4 mm
- Bore
- 5.4 in / 137.7 mm
- Emissions
- 2006 EPA and CARB Tier 2, and EC Stage II Non-Road emissions certified
- Length
- 75.5 in / 1918 mm
- Width
- 57.6 in / 1463 mm
- Height
- 52 in / 1321 mm
- Weight
- 6382 lb / 2895 kg
- Cooling System
- 14.5 gal (US) / 54.9 l
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 800 BHP / 597 bkW
- Displacement
- 1104 in³ / 18.1 l
- Minimum Rating
- 755 BHP / 563 bkW
- Governor and Protection
- ADEM A4
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136 (SAE 0), 113 (SAE 1)
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 7.2 in / 183 mm
- Bore
- 5.7 in / 145 mm
- Emissions
- EPA Tier 4 Final and EU Stage IV
- Length
- 60.2 in / 1530.3 mm
- Width
- 37.8 in / 960.5 mm
- Height
- 50.5 in / 1281.9 mm
- Weight
- 3482 lb / 1580 kg
- Cooling System
- 7.1 gal (US) / 26.9 l
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 950 BHP / 708 bkW
- Displacement
- 1648 in³ / 27 l
- Minimum Rating
- 800 BHP / 597 bkW
- Governor and Protection
- ADEM A4
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 6 in / 152.4 mm
- Bore
- 5.4 in / 137.7 mm
- Emissions
- U.S. EPA Tier 4 Final
- Length
- 85 in / 2159 mm
- Width
- 49 in / 1253 mm
- Height
- 63 in / 1594 mm
- Weight
- 6151 lb / 2790 kg
- Cooling System
- 15.9 gal (US) / 60 l