C32B
Cat?� C32B HRC Diesel Engine
DESCRIPTION
Building on the legacy of the C32, the C32B features strengthenedperformance critical components like cylinder head, block,
crankshaft, pistons, rods, and main bearings. Its simple,
maintenance free diesel oxidation catalyst (DOC) aftertreatment
meets U.S. EPA Tier 4 Final, EU Stage V, and other equivalent
emissions standards
High Power Density
C32B engines have excellent power density with a peak U.S. EPA Tier 4 Final certified rating of 895 kW (1200 hp) and 839 kW (1125 hp) for EU Stage V. Its U.S. EPA Tier 2 equivalent version offers a peak rating of 1007 kW (1350 hp).
Built to Last
The C32B uses a dual-can diesel oxidation catalyst (DOC) aftertreatment. This maintenance-free, passive aftertreatment solution eliminates the need for thermal management or regeneration. The C32B does not require diesel exhaust fluid (DEF), helping minimize total fluid consumption and eliminating the need for any DEF infrastructure (DEF tank, DEF pump, heated DEF lines, additional electronics, and DEF storage on the jobsite). DOC-only simplifies the aftertreatment solution, helps minimize overall package size, and reduces operation costs.
DOC only Aftertreatment
The C32B boasts strength from the inside out. Weighing approximately 50 kg (110 lb) more than its predecessor, the C32B's performance critical components have been strengthened and upgraded to help extend time between rebuilds.
- Standard Equipment
- Specs
- Docs
Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump
- General
- Paint: Caterpillar yellow, with optional colors available on request
Specs
Overview
Long Name:
Cat?� C32B HRC Diesel Engine
Name:
C32B
Brand:
Cat
Status:
Current
Power Rating
Maximum Power
1200 hp / 895 kW
Maximum Torque
4056 lb-ft @ 1200 rpm / 5499 Nm @ 1200 rpm
Rated Speed
1800 rpm
Minimum Power
1000 hp / 746 kW
Emission Standards
Emissions
EU Stage V
General
Engine Configuration
V-12
Bore
5.7 in / 145 mm
Stroke
6.4 in / 162 mm
Displacement
1958.9 in³ / 32.1 l
Compression Ratio
15.0:1
Aspiration
Twin Turbocharged Aftercooled (TTA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC
Engine Dimensions - Approximate
Length
73.8 in / 1874 mm
Width
63 in / 1600 mm
Height
53.9 in / 1370 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
6735 lb / 3055 kg
Aftertreatment Dimensions
Length
45.5 in / 1156 mm
Width
17.3 in / 440 mm
Height
16 in / 407 mm
Weight
150 lb / 68 kg
SEE HOW C32B COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Industrial Diesel Engines
C32B
- Brand
- Cat
- Status
- Current
- Maximum Power
- 1200 hp / 895 kW
- Maximum Torque
- 4056 lb-ft @ 1200 rpm / 5499 Nm @ 1200 rpm
- Rated Speed
- 1800 rpm
- Minimum Power
- 1000 hp / 746 kW
- Emissions
- EU Stage V
- Engine Configuration
- V-12
- Bore
- 5.7 in / 145 mm
- Stroke
- 6.4 in / 162 mm
- Displacement
- 1958.9 in³ / 32.1 l
- Compression Ratio
- 15.0:1
- Aspiration
- Twin Turbocharged Aftercooled (TTA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC
- Length
- 45.5 in / 1156 mm
- Width
- 17.3 in / 440 mm
- Height
- 16 in / 407 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 6735 lb / 3055 kg
Selected Model
Industrial Diesel Engines
C32
- Brand
- Caterpillar
- Status
- Current
- Maximum Power
- 1350 hp / 1007 kW
- Maximum Torque
- 4548 lb-ft @ 1400 rpm / 6166 Nm @ 1400 rpm
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 950 hp / 708 kW
- Emissions
- U.S. EPA Tier 2 Equivalent
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 5.7 in / 145 mm
- Stroke
- 6.4 in / 162 mm
- Displacement
- 1958.9 in³ / 32.1 l
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Length
- 75.5 in / 1917 mm
- Width
- 58.2 in / 1479 mm
- Height
- 51.9 in / 1319 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 6495 lb / 2946 kg
Industrial Diesel Engines
C4.4
- Brand
- Caterpillar
- Status
- Current
- Maximum Power
- 200 hp / 150 kW
- Maximum Torque
- 609 lb-ft @ 1400 rpm / 825 Nm @ 1400 rpm
- Rated Speed
- 2200 rpm
- Minimum Power
- 109 hp / 82 kW
- Emissions
- U.S. EPA & CARB Tier 4 Final, EU Stage V
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 4.1 in / 105 mm
- Stroke
- 5 in / 127 mm
- Displacement
- 268.5 in³ / 4.4 l
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF+SCR
- Length
- 26.5 in / 675 mm
- Width
- 24.5 in / 623 mm
- Height
- 17.8 in / 453 mm
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 1180 lb / 535 kg