DG200 GC (3 phase)
DG200-2 (3 phase)
DG200 GC (3 phase)
DESCRIPTION
The Cat® spark-ignited generator product line for stationary applications feature permanent magnet excitation, amortisseur winding, skewed stator, voltage adjustment through the EMCP controller, Class H winding insulation and 2/3 pitch incorporated.Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.Electric PowerEngine
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
EMCP Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Design Criteria
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
UL 2200 / CSA - Optional
- UL 2200 Listed packages
- CSA Certified
- Certain restrictions may apply
- Consult with your Cat® Dealer
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Cooling
- Closed coolant recovery system
- Factory-installed radiator
- 50/50 Ethylene glycol antifreeze
- Radiator and cooling fan complete with protective guards
- Standard ambient temperatures up to 50°C (122°F)
- Air Inlet
- Single element air filter
- Fuel
- Primary and secondary fuel shut-off
- Low fuel pressure switch
- Fuel pressure test po
- Natural Gas or LP Vapor
- NPT connection
- Dual lock off valves
- Exhaust
- Exhaust outlet with 3” pipe
- Generator
- Permanent magnet excitation
- Full load capacity alternator
- Class H insulation material
- Permanent magnet excitation
- Integrated Voltage Regulator
- Matched to the performance and output characteristics of Cat engines
- Class H insulation material
- Full load capacity alternator
- IP23 Protection
- Controls
- EMCP 4.2 Series generator set controller
- Mounting
- Vibration isolaton (puck type)
- Rubber vibration isolators
- Electric Power - Package Serial Number Prefix
- Battery charging alternator
- Electric Starting and/or Prelube
- Battery cables
- Solenoid activated starter motor
- Engine electrical system
- Solenoid activated starter motor
- Governor
- Electronic governor (non adjustable)
- Control Panel
- EMCP 4.2 Series generator set controller
- Starting/Charging
- Batteries with rack and cables
- 12 volt starting motor
Optional Equipment
- Starting/Charging
- Jacket water heater
- Battery heater
- Charging alternator
- Battery charger – UL Listed 10 amp
- General
- Enclosures: sound attenuated, weather protective
- Suitable for Use as Service Equipment (SUSE)
- Automatic transfer switches (ATS)
- UL 2200 package
- CSA Certification
- Generator
- Thermal magnetic or electronic trip MCCBs
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM)
- Oversize and premium generators
Specs
Overview
Long Name:
DG200-2 (3 phase)
Name:
DG200 GC (3 phase)
Brand:
Caterpillar
Status:
Current
Generator Set Specifications
Frequency
60 Hz
Natural Gas Rating
200 eKW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
Engine Specifications
Engine Model
14.2 L, Inline 6, 4 Cycle, Spark - Ignited
Generator Set Specifications
Displacement
864.71 in / 14.17 l
Engine Specifications
Fuel System
Carburetor, Down Draft
Generator Set Specifications
Fuel Type
Natural Gas
Speed
1800 rpm
Engine Specifications
Aspiration
Turbocharged-Aftercooled
Governor Type
Electronic
Compression Ratio
9.5:1
Bore
5.31 in / 134.87 mm
Stroke
6.5 in / 165.1 mm
Generator Set Dimensions
Length
127.95 in / 3250 mm
Width
52.93 in / 1344.5 mm
Height
67.37 in / 1711.2 mm
Weight
5756 lb / 2610.9 kg
SEE HOW DG200 GC (3 phase) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Gas Generator Sets
DG200 GC (3 phase)
- Brand
- Caterpillar
- Status
- Current
- Frequency
- 60 Hz
- Natural Gas Rating
- 200 eKW
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Engine Model
- 14.2 L, Inline 6, 4 Cycle, Spark - Ignited
- Displacement
- 864.71 in / 14.17 l
- Fuel System
- Carburetor, Down Draft
- Fuel Type
- Natural Gas
- Speed
- 1800 rpm
- Aspiration
- Turbocharged-Aftercooled
- Governor Type
- Electronic
- Compression Ratio
- 9.5:1
- Bore
- 5.31 in / 134.87 mm
- Stroke
- 6.5 in / 165.1 mm
- Length
- 127.95 in / 3250 mm
- Width
- 52.93 in / 1344.5 mm
- Height
- 67.37 in / 1711.2 mm
- Weight
- 5756 lb / 2610.9 kg
Selected Model
Gas Generator Sets
DG175 GC (Single-phase)
- Brand
- Caterpillar
- Status
- Current
- Frequency
- 60 Hz
- Natural Gas Rating
- 175 ekW
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Engine Model
- G14.2L Inline 6, 4 cycle, Spark Ignited
- Displacement
- 864.71 in / 14.17 l
- Fuel System
- Carburetor, Down Draft
- Fuel Type
- Natural Gas
- Speed
- 1800 rpm
- Aspiration
- Turbocharged - Aftercooled
- Governor Type
- Electronic
- Compression Ratio
- 9.5:1
- Bore
- 5.31 in / 134.87 mm
- Stroke
- 6.5 in / 165.1 mm
- Length
- 127.95 in / 3250 mm
- Width
- 52.93 in / 1344.5 mm
- Height
- 67.37 in / 1711.2 mm
- Weight
- 5756 lb / 2610.9 kg
Gas Generator Sets
DG200 GC (Single-phase)
- Brand
- Caterpillar
- Status
- Current
- Frequency
- 60 Hz
- Natural Gas Rating
- 200 eKW
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Engine Model
- 14.2 L Spark - Ignited
- Displacement
- 864.71 in³ / 14.17 l
- Fuel System
- Carburetor, Down Draft
- Fuel Type
- Natural Gas
- Speed
- 1800 rpm
- Aspiration
- Turbocharged-Aftercooled
- Governor Type
- Electronic
- Compression Ratio
- 9.5:1
- Bore
- 5.31 in / 134.87 mm
- Stroke
- 6.5 in / 165.1 mm
- Length
- 127.95 in / 3250 mm
- Width
- 52.93 in / 1344.5 mm
- Height
- 67.37 in / 1711.2 mm
- Weight
- 5756 lb / 2610.9 kg