H115 S

H115 S Hammer

Cat® Performance hammers are designed for durability in rock breaking and concrete demolition.

H115 S

DESCRIPTION

Cat® H115 S Performance hammers are designed for productivity in rock breaking and concrete demolition. With powerful hydraulics and quick access to maintenance areas, Cat H115 S Performance hammers help increase overall productivity and reduce maintenance costs. Cat H115 S Performance hammers are a versatile solution for many applications, including road construction, trenching, and demolition.

High Performance

        
  • Automatic shut off offers blank firing protection by stopping the piston when there is no material under the tool to help extend the life of the hammer.
    •     
  • The internal buffering system helps reduce machine vibration and increase noise suppression.
    •     
  • The standard silencing feature allows you to use a Performance hammer on job sites in noise-sensitive areas like neighborhoods or near hospitals where noise is regulated.

Cat H215 S Performance Hammer working
Cat H215 S Performance Hammer working

Increase Productivity

        
  • Manually adjust the piston speed by choosing between high piston speed or maximum power to help increase efficiency and production on the job site.
    •     
  • The oil-fired operating cycle helps provide full power during every blow and less waste heat.
    •     
  • Critical hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.

Easy to Maintain

        
  • Standard on-board autolube provides continuous greasing as the hammer runs, eliminating the need for manual greasing.
    •     
  • The slip-fit and 90-degree rotatable lower bushing allows for easy replacement in the field, helping reduce service time and extend service life.
    •     
  • The oil-fired design eliminates the need to check gas charge.
    •     
  • Quick and easy access to maintenance areas helps make hammer maintenance simple.

Standard On-board Autolube
Cat Attachment Tracker

Boost Efficiency and Productivity with Integrated Technologies

        
  • Never waste time looking for your attachments again. Cat asset tracking is available on all hammers.
    •     
  • Track your entire fleet of attachments and machines from one source. Hammers with asset tracking can be viewed within VisionLink®.
    •     
  • Keep your assets secure. Hammers with an asset tracker send an alert if they leave an easy-to-set up site boundary.

  • Specs
  • Docs

Specs

Overview

Long Name:
H115 S Hammer
Name:
H115 S
Brand:
Caterpillar
Status:
Current
Blows per Minute
370 to 800
Minimum Operating Weight
2354 lb / 1070 kg
Rated Flow - Minimum
19 gal/min / 70 l/min
Rated Flow - Maximum
34 gal/min / 130 l/min
Minimum Operating Pressure
1885 psi / 13000 kPa
Maximum Operating Pressure
2175 psi / 15000 kPa
Tool Shaft Diameter
4.3 in / 110 mm
Minimum Carrier Weight
26500 lb / 12 t
Maximum Carrier Weight
44100 lb / 20 t

SEE HOW H115 S COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Performance Hammers
H115 S
H115 S
Brand
Caterpillar
Status
Current
Blows per Minute
370 to 800
Minimum Operating Weight
2354 lb / 1070 kg
Rated Flow - Minimum
19 gal/min / 70 l/min
Rated Flow - Maximum
34 gal/min / 130 l/min
Minimum Operating Pressure
1885 psi / 13000 kPa
Maximum Operating Pressure
2175 psi / 15000 kPa
Tool Shaft Diameter
4.3 in / 110 mm
Minimum Carrier Weight
26500 lb / 12 t
Maximum Carrier Weight
44100 lb / 20 t
Selected Model
Performance Hammers
H110 S
H110 S
Brand
Caterpillar
Status
Current
Blows per Minute
450 to 1000
Minimum Operating Weight
2090 lb / 950 kg
Rated Flow - Minimum
16 gal/min / 60 l/min
Rated Flow - Maximum
32 gal/min / 120 l/min
Minimum Operating Pressure
1885 psi / 13000 kPa
Maximum Operating Pressure
2320 psi / 16000 kPa
Tool Shaft Diameter
3.9 in / 100 mm
Minimum Carrier Weight
24300 lb / 11 t
Maximum Carrier Weight
39700 lb / 18 t
More Details
Performance Hammers
H120 S
H120 S
Brand
Caterpillar
Status
Current
Blows per Minute
350 to 620
Minimum Operating Weight
3256 lb / 1480 kg
Rated Flow - Minimum
26 gal/min / 100 l/min
Rated Flow - Maximum
45 gal/min / 170 l/min
Minimum Operating Pressure
1885 psi / 13000 kPa
Maximum Operating Pressure
2175 psi / 15000 kPa
Tool Shaft Diameter
4.7 in / 120 mm
Minimum Carrier Weight
35300 lb / 16 t
Maximum Carrier Weight
59500 lb / 27 t
More Details