S-40 Pin Grabber LCS 3 Ton
S-40 Pin Grabber S Type Coupler With Secure Lock For 3 Ton Mini Excavators
DESCRIPTION
The S Type Coupler is a pin grabber style dedicated coupler. It ensures an exchangeability of tools within a fleet of machines with different platforms. Consistent tight fit to attachment, low offset, and reliability are the key features.Cat® S Type Couplers for Mini Excavators are an optimal design for a dedicated quick coupler solution. Low offset, pin grabber ability, and a wedge type locking system ensures a tight fit, no attachment play during use. It also creates the solution to exchange work tools among different platforms and brands. In combination with the Tilt Rotate System that can be equipped with an S Type Coupler and the variety of different buckets offered, it provides a complete attachment solution for Mini Excavators. The coupler is designed with the highest safety standards and comes with a visible locking mechanism.An Attachment for Every Job - Cat® Work Tool Attachments
Hydraulic Cylinder Lock
Hydraulic cylinder with check, relief and pressure control valve included. Locking Control System (LCS) incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation Mini Hydraulic Excavator machine's (ECM) by way of an electrical harness.
Locking Indicator
The visual verification rod allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Lifting Hook
Integrated lifting hook allows the operator to switch tasks to lifting without changing tools or coupler.
Low Profile/Build Height
Low build height quick coupler with minimal offset results in minimal break out force reduction.
Protected Components
All components integrated inside the coupler housing and protected against contaminants and potential force impact.
Wedge Type Locking Mechanism
Wedge type locking mechanism minimizes impact loading into the hydraulic cylinder.
Locking Control System
Locking Control System (LCS) incorporates cylinder positioning sensing and provides electrical feedback to the machine which requires Cat® software to display locking system status.
- Specs
Specs
Overview
SEE HOW S-40 Pin Grabber LCS 3 Ton COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Cat
- Status
- Current
- Weight
- 94.8 lb / 43 kg
- Lifting Hook Capacity
- 4409.2 lb / 2000 kg
- Width
- 10 in / 254 mm
- Overall Length
- 18.5 in / 470 mm
- Overall Height
- 10.3 in / 262 mm
- Pin Diameter
- 1.6 in / 40 mm
- Machine Class
- 3-4 Ton Mini Excavators
- Interface Type
- Pin On
- Required Hydraulics
- Dedicated Factory Installed
- Maximum Operating Pressure
- 4351.1 psi / 300 bar
- Coupler Type
- S-40 Pin Grabber
- Brand
- Cat
- Status
- Current
- Weight
- 105.8 lb / 48 kg
- Lifting Hook Capacity
- 4409.2 lb / 2000 kg
- Width
- 11.1 in / 281 mm
- Overall Length
- 19.5 in / 496 mm
- Overall Height
- 10.7 in / 271 mm
- Pin Diameter
- 1.8 in / 45 mm
- Machine Class
- 5-6 Ton Mini Excavators
- Interface Type
- Pin On
- Required Hydraulics
- Dedicated Factory Installed
- Maximum Operating Pressure
- 4351.1 psi / 300 bar
- Coupler Type
- S-40 Pin Grabber
- Brand
- Cat
- Status
- Current
- Weight
- 108 lb / 49 kg
- Lifting Hook Capacity
- 4409.2 lb / 2000 kg
- Width
- 11.1 in / 281 mm
- Overall Length
- 19.5 in / 496 mm
- Overall Height
- 10.7 in / 271 mm
- Pin Diameter
- 1.8 in / 45 mm
- Machine Class
- 5-6 Ton Mini Excavators
- Interface Type
- Pin On
- Required Hydraulics
- Dedicated Factory Installed
- Maximum Operating Pressure
- 4351.1 psi / 300 bar
- Coupler Type
- S-40 Pin Grabber