NEW | 2025 CAT 226D3-0EK503314
LISTING DETAILS
Model
226D3
Product Family
SKID STEERS
Manufacturer
CAT
Year
2025
Serial Number
0EK503314
Location
RANCHO BERNARDO, CA
Unit Number
H19071
Specs
Unit Specifications
CAB PACKAGE, ULTRA
AXLES, STANDARD
RIDE CONTROL
BATTERY,HD,DISCONNECT, 850 CCA
REAR LIGHTS
DOOR, CAB, POLYCARBONATE
SEAT BELT, 3"
TIRES, 10/16.5 GA 8PR
HYDRAULIC OIL, STANDARD
CERTIFICATION ARR, P65
INSTRUCTIONS, ANSI, USA
INSTRUCTIONS, ENGLISH
SHIPPING/STORAGE PROTECTION
FILM, RIDE CONTROL, ANSI
PACKING, CONTAINER
LANE 3 ORDER
PRODUCT LINK, CELLULAR PL243
226D3 M205 CPM
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- ELECTRICAL
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
- OPERATOR ENVIRONMENT
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
- POWER TRAIN
- Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
- OTHER
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
- MANDATORY EQUIPMENT
- Hydraulics, Standard or High Flow
- Quick Coupler, Mechanical or Powered
- Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- EU Preparation Package (Europe only)
- Power Train: One Speed, One Speed with Ride Control, Two Speed
- Tires, 10 × 16.5
- PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGES:
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
Optional Equipment
- OPTIONAL EQUIPMENT
- Hand-Foot Style Controls
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Product Link PL641, Cellular
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Standard Equipment in Europe Only
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
Specs
Overview
Long Name:
226D3 Skid Steer Loader
Name:
226D3
Brand:
Caterpillar
Status:
Current
Engine
Gross Power - SAE J1995
67.1 hp / 50.1 kW
Operating Specifications
Rated Operating Capacity
1550 lb / 705 kg
Weights
Operating Weight
5849 lb / 2653 kg
Dimensions
Wheel Base
41.5 in / 1054 mm
Length - With Bucket on Ground
127.3 in / 3234 mm
Length - Without Bucket
99.4 in / 2524 mm
Height - Top of Cab
79.8 in / 2028 mm
Vehicle Width over Tires
58.9 in / 1497 mm
Maximum Overall Height
143.8 in / 3652 mm
Bucket Pin Height - Maximum Lift
110.9 in / 2818 mm
Bucket Pin Height - Carry Position
8.5 in / 215 mm
Reach - Maximum Lift/Dump
21 in / 533 mm
Clearance at Maximum Lift and Dump
81.8 in / 2077 mm
Ground Clearance
6.9 in / 175 mm
Departure Angle
27.9°
Maximum Dump Angle
46.7°
Rack Back Angle - Maximum Height
88.9°
Bumper Overhang - Behind Rear Axle
35.2 in / 8944 mm
Turning Radius from Center - Bucket
77.8 in / 1977 mm
Maximum Reach - With Arms Parallel to Ground
50.7 in / 1288 mm
Turning Radius from Center - Machine Rear
59.6 in / 1513 mm
Turning Radius from Center - Coupler
43.5 in / 1104 mm
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi / 23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi / 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
33.5 hp / 26.5 kW
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 hp / 38 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min / 69 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min / 99 l/min
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - One Speed
7.6 mile/h / 12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h / 17.8 km/h
Service Refill Capacities
Chain Box - Each Side
1.8 gal (US) / 7 l
Cooling System
3.2 gal (US) / 12 l
Engine Crankcase
2.6 gal (US) / 10 l
Fuel Tank
15.1 gal (US) / 57 l
Hydraulic System
11.9 gal (US) / 45 l
Hydraulic Tank
9 gal (US) / 34 l
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Engine
Net Power - SAE 1349
65.8 hp / 49.1 kW
Displacement
134.3 in³ / 2.2 l
Stroke
3.9 in / 100 mm
Bore
3.3 in / 84 mm
Engine Model
Cat C2.2 CRDI
Weights
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Engine
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf / 208 N·m
Net Power - ISO 9249
66.5 hp / 49.6 kW
Operating Specifications
Rated Operating Capacity with Optional Counterweight
1650 lb / 750 kg
Tipping Load
3100 lb / 1410 kg
Breakout Force - Tilt Cylinder
3927 lb / 1781 kg
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Noise Level
Outside Cab***
102 dB(A) / 102 dB(A)
Inside Cab**
83 dB(A) / 83 dB(A)
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
- 226D3 Product Brochure (pdf)
- Advanced Display User Guide for Skid Steer, Compact Track, and Multi Terrain Loaders - D/D2/D3 Series (pdf)
- 226D3/232D3/236D3/242D3/246D3/262D3/272D3/272D3 XE Product Brochure (pdf)
- Retrofit Options and Accessories Guide for Compact Track, Skid Steer and Multi Terrain Loaders (pdf)