NEW | 2025 CAT 308 CR-0GG809542
LISTING DETAILS
Model
308 CR
Product Family
EXCAVATORS
Manufacturer
CAT
Year
2025
Serial Number
0GG809542
Location
RANCHO BERNARDO, CA
Unit Number
039883
Specs
Unit Specifications
DRAIN, ECOLOGY
HEATER, WATER JACKET
SEAT, AIR SUSP, FABRIC, HEATED
BELT, SEAT, 3" RETRACTABLE
ALARM, TRAVEL
MONITOR NEXT GEN, ADVANCED, CR
LIGHTS, LED
INTEGRATED RADIO
CAMERA, REAR VIEW
ELECTRICAL ARR, C3.3 HRC
308 07A CR MINI EXCAVATOR
HYDRAULIC AR
UNDERCARRIAGE AR
CHASSIS AR
LUBRICANT GP
FILM GP-QR
BOOM, SWING
LINES, BOOM
LINES, STICK
LINES, QC, LNG STK, 3 LINE
ENGINE, EPA TIER 4 FINAL
CONTROL, QC, 3 LINE
CAT KEY, WITH PASSCODE OPTION
INSTRUCTIONS, ANSI
INSTRUCTIONS, CANADA
COUNTERWEIGHT, EXTRA, 550LBS
FILM, COUPLER, ISO
SOFTWARE, PROPORTIONAL CONTROL
SOFTWARE, STICK STEER CONTROL
SOFTWARE, 2 WAY CONTROL
SOFTWARE, CODED START
PRODUCT LINK, CELLULAR PLE643
STD BLADE, STD U/C, TG W/PAD
STICK, LONG
LINKAGE, BUCKET W/ LIFTING EYE
EOU HOUSE SWING COVER, 8T
WIRING GP
COVER GP
PLUG GP
LANE 1 ORDER
SERIALIZED TECHNICAL MEDIA KIT
SHIPPING/STORAGE PROTECTION
PACKING, LAST MILE PROGRAM
DEALER PDI SERVICES - STANDARD
COUPLER, PG, HYDR.D.LOCK, 7-9T
RL7E39
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- ENGINE
- Cat C3.3B Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Swing Brake
- Automatic Two Speed Travel
- Fuel Water Separator with Indicator
- Radial Seal – Double Element Air Filter
- Extended Life Coolant, –37° C (–35° F)
- HYDRAULICS
- Electronic Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
- Power On Demand
- Hydraulic Temperature Monitoring
- Certified Accumulator
- HYDO Advanced Hydraulic Oil
- OPERATOR ENVIRONMENT
- Top Guard ISO 10262 1998 Level I
- ROPS ISO 12117-2:2008
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer
- Adjustable Wrist Rests
- Molded Footrests
- Removable, Washable Floor Mat
- Travel Pedals and Hand Levers
- Cat Key with Passcode Option
- HVAC with Automatic Temperature Control
- Hydraulic Lockout Controls
- Integrated Lower Front Window
- Assisted Front Window Overhead Storage
- Rear Window Emergency Exit
- Fabric, High Back, Suspension Seat
- Retractable Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- LED Interior Light
- Literature Holder
- Mounting Bosses for Top and Front Guards
- 12V Power Socket
- Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
- Skylight
- Signaling/Warning Horn
- Cab and (left side) Boom Work Lights
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)
– Jog Dial Interface
– Fuel Level and Coolant Temperature Gauges
– Maintenance and Machine Monitoring
– Performance and Machine Adjustments
– Numeric Security Code
– Multiple Languages
– Camera Ready (IP68 & IP69K)
– Hour Meter with Wake Up Switch
- UNDERCARRIAGE
- Greased and Lubricated Track
- Tie Down Eyes on Track Frame
- Dozer Blade
- Dozer Float
- Bolt-on, Reversible Wear Edge
- BOOM, STICK AND LINKAGES
- One Piece Boom (3400 mm/133.9 in)
- Standard Stick (1820 mm/71.7 in)
- Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler (not available in all regions)
- Thumb Ready (not available in all regions)
- ELECTRICAL
- 12 Volt Electrical System
- 60 Ampere Alternator
- Circuit Breaker
- 900 CCA Maintenance Free Battery
- Battery Disconnect
- Ignition Key Stop Switch
- OTHER
- Locks on External Enclosure Doors
- Lockable Fuel Cap
- Beacon Socket
- Rear Reflectors
- TECHNOLOGY
- Product Link Basic
Optional Equipment
- OPERATOR ENVIRONMENT
- Push to Start with Bluetooth® Key
- Air Suspension Heated Seat
- Rain Visor
- Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
– Touch Screen
– Site Reference System
– High Definition Camera Capable (IP68 & IP69K)
– Numeric Security Code
- UNDERCARRIAGE
- Wide Dozer Blade
- Steel Tracks (450 mm/17.7 in wide)
- Wide Steel Tracks (600 mm/23.6 in)
- Steel Track with Rubber Pads
- Track Guides
- BOOM, STICK AND LINKAGES
- Long Stick (2360 mm/92.9 in)
- Attachments including Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Certified Lifting Eye
- ELECTRICAL
- Product Link™ Elite (regulations apply)
- Travel Alarm
- Rearview Camera
- Rotating Beacon
- GUARDING
- Mesh Front Guard ISO 10262 1998 Level I
- Heavy Duty Front Guard ISO 10262 1998 Level II
- Overhead Cab Guard ISO 10262 1998 Level II
- Polycarbonate Front Window EN356 P5A
- Track Guards
- OTHER
- Additional Counterweight
- Water Jacket Heater
- Refueling Pump
- Variable Angle Boom (refer to 308 CR VAB brochure for VAB specs and additional information)
- TECHNOLOGY
- Ease of Use Indicate
- Ease of Use E-Fence
- Cat Grade Advanced 2D
- Cat Grade 3D
- Product Link Elite (regulations apply)
Specs
Overview
Long Name:
308 CR Mini Hydraulic Excavator
Name:
308 CR
Brand:
Caterpillar
Status:
Current
Engine
Net Power
69.5 hp / 51.8 kW
Engine Model
Cat C3.3B
Stroke
4.7 in / 120 mm
Bore
3.7 in / 94 mm
Gross Power - SAE J1995
74.3 hp / 55.4 kW
Displacement
203 in³ / 3.33 l
Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269
69.5 hp / 51.8 kW
Weights
Operating Weight
18493 lb / 8387 kg
Note (1)
*Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.
Note (2)
**Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Maximum Operating Weight with Cab**
18493 lb / 8387 kg
Minimum Operating Weight with Cab*
16542 lb / 7502 kg
Weight Increase from Minimum Configuration
Steel Tracks with Pads
752 lb / 341 kg
Counterweight
552 lb / 250 kg
Long Stick
146 lb / 66 kg
Travel System
Maximum Traction Force - High Speed
6250 lb / 27.8 kN
Ground Pressure - Maximum Weight
5.5 psi / 37.6 kPa
Ground Pressure - Minimum Weight
4.9 psi / 33.8 kPa
Travel Speed - High
3.2 mile/h / 5.1 km/h
Travel Speed - Low
1.9 mile/h / 3.1 km/h
Maximum Traction Force - Low Speed
15175 lb / 67.5 kN
Gradeability - Maximum
30 degrees
Service Refill Capacities
Fuel Tank
39 gal (US) / 147 l
Hydraulic System
29 gal (US) / 110 l
Hydraulic Tank
14 gal (US) / 53 l
Cooling System
2.6 gal (US) / 10 l
Engine Oil
3 gal (US) / 11.2 l
Hydraulic System
Digging Force - Bucket
13946 lb / 62 kN
Operating Pressure - Travel
4134 psi / 285 bar
Operating Pressure - Swing
3626 psi / 250 bar
Operating Pressure - Equipment
4134 psi / 285 bar
Digging Force - Stick - Long
8032 lb / 35.7 kN
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Note
Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Pump Flow at 2,400 rpm
44 gal/min / 167 l/min
Digging Force - Stick - Standard
9509 lb / 42.3 kN
Maximum Auxiliary Circuit - Primary - Pressure at Pump
4134 psi / 285 bar
Maximum Auxiliary Circuit - Secondary - Pressure at Pump
4134 psi / 285 bar
Maximum Auxiliary Circuit - Primary - Flow at Pump
35 gal/min / 131 l/min
Maximum Auxiliary Circuit - Secondary - Flow at Pump
9 gal/min / 33 l/min
Swing System
Machine Swing Speed
10.6 r/min / 10.6 r/min
Boom Swing - Right
50 degrees
Blade
Height
17 in / 431 mm
Width - Standard
90.6 in / 2300 mm
Width - Wide
96.5 in / 2450 mm
Certification - Cab
Top Guard
ISO 10262:1998 (Level I)
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Sound
Operator Sound Pressure (ISO 6396:2008)
72 dB(A) / 72 dB(A)
Note
European Union Directive "2000/14/EC"
Average Exterior Sound Pressure (ISO 6395:2008)
99 dB(A) / 99 dB(A)
Dimensions - Standard Stick
Cab Height
100 in / 2541 mm
Vertical Wall
117.8 in / 2991 mm
Boom In Reach
120.4 in / 3059 mm
Tail Swing with Counterweight
62.4 in / 1585 mm
Boom Swing - Right
36.8 in / 935 mm
Track Belt/Shoe Width
17.7 in / 450 mm
Maximum Reach
281.1 in / 7141 mm
Stick Length
71.7 in / 1820 mm
Maximum Blade Height
14.6 in / 370 mm
Boom Swing - Left
23.8 in / 604 mm
Maximum Blade Depth
16 in / 407 mm
O/A Track Width
90.6 in / 2300 mm
Maximum Dig Height
265.2 in / 6736 mm
Maximum Dump Clearance
187.4 in / 4760 mm
Maximum Reach - Ground Level
273.6 in / 6949 mm
Tail Swing without Counterweight
57.1 in / 1450 mm
O/A Undercarriage Length
113.4 in / 2880 mm
Swing Bearing - Height
29.7 in / 756 mm
Ground Clearance
13.8 in / 350 mm
Dig Depth
161.7 in / 4108 mm
Note
*Boom Height when stick is pinned in transport position with no attachments.
Overall Shipping Length - with Counterweight
264 in / 6706 mm
Note (1)
**Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.
Overall Shipping Length - without Counterweight
258.8 in / 6574 mm
Note (2)
***With blade positioned at the rear of the machine.
Height - Boom Working - With Tools**
104.7 in / 2660 mm
Height - Boom Transport - No Tools*
95.7 in / 2430 mm
Dimensions - Long Stick
Dig Depth
182.8 in / 4643 mm
Boom Swing - Left
23.8 in / 604 mm
Maximum Dig Height
277.1 in / 7039 mm
Maximum Blade Height
14.6 in / 370 mm
Track Belt/Shoe Width
17.7 in / 450 mm
Cab Height
100 in / 2541 mm
Tail Swing with Counterweight
62.4 in / 1585 mm
O/A Undercarriage Length
113.4 in / 2880 mm
Maximum Dump Clearance
199.7 in / 5072 mm
Boom Swing - Right
36.8 in / 935 mm
Maximum Blade Depth
16 in / 407 mm
Ground Clearance
13.8 in / 350 mm
Stick Length
92.8 in / 2358 mm
Maximum Reach
300.7 in / 7637 mm
Maximum Reach - Ground Level
293.7 in / 7460 mm
Boom In Reach
126.6 in / 3215 mm
Swing Bearing - Height
29.7 in / 756 mm
O/A Track Width
90.6 in / 2300 mm
Tail Swing without Counterweight
57.1 in / 1450 mm
Vertical Wall
134 in / 3404 mm
Note
*Boom Height when stick is pinned in transport position with no attachments.
Note (2)
***With blade positioned at the rear of the machine.
Note (1)
**Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.
Height - Boom Transport - No Tools*
89 in / 2260 mm
Height - Boom Working - With Tools**
120.1 in / 3050 mm
Overall Shipping Length - without Counterweight
6872 mm (270.6 in)***
Overall Shipping Length - with Counterweight
6872 mm (270.6 in)***
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Swing System
Boom Swing - Left
60 degrees
Sustainability
Recyclability
96%
- 308 CR Product Brochure (pdf)
- Cat Mini Hydraulic Excavators Product Line Brochure (North America) (pdf)
- Cat Mini Hydraulic Excavators Product Line Brochure (Europe) (pdf)
- Options And Accessories Kit Guide for Mini Hydraulic Excavators (pdf)
- Cat Attachments for Mini Excavators Brochure (pdf)
- Attachment Compatibility Guide for Mini Excavators (pdf)